User manual SHARP AR-286 SECTION 3

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AR-286. We hope that this SHARP AR-286 user guide will be useful to you.


SHARP AR-286 SECTION 3: Download the complete user guide (1076 Ko)

You may also download the following manuals related to this product:

   SHARP AR-286 (3469 ko)
   SHARP AR-286 (16274 ko)
   SHARP AR-286 (16292 ko)
   SHARP AR-286 (3680 ko)
   SHARP AR-286 SECTION 4 (2059 ko)
   SHARP AR-286 SECTION 1 (2673 ko)
   SHARP AR-286 SECTION 2 (8210 ko)

Manual abstract: user guide SHARP AR-286SECTION 3

Detailed instructions for use are in the User's Guide.

[. . . ] If copying is continued, copies will gradually become lighter until the copier stops and the message display changes to "ADD TONER. Toner can be added any time after the message "(TONER SUPPLY IS LOW. When either message appears, you can use the INFORMATION ( ) key for detailed information as necessary. During long copy runs of multiple originals containing many images and/or dark shades, "TONER REPLENISHMENT IN PROGRESS. " will appear and the copier will stop making copies even though toner is left. [. . . ] Misfeed removal Paper feed area open/close lever Open the right side cover. q q Hold the handle and gently open the cover. If any paper is set in the bypass tray, remove the paper and close the bypass tray before opening the right side cover. 2 Remove the misfed paper. q Open the paper feed area open/close lever in the direction of the arrow and remove the misfed paper. 3 Close the right side cover. q Confirm that the misfeed display is cleared. 5-10 MAINTENANCE REQUIRED When the message "READY TO COPY. (MAINTENANCE REQUIRED)" appears in the message display, service by an authorised Sharp Service Technician will be required soon. Contact your Service Centre as soon as possible. CHAPTER5 COPIER TROUBLE?Maintenance required 5-11 TROUBLESHOOTING Always check the message display whenever the copier stops or operation is not possible. If the messages do not give specific instructions, check the list below. Problem Solution q Copier plugged in? Plug the copier into a grounded outlet. Copier does not operate. q Power switch on? Turn the power switch on. Copies are too dark or too light. q Copy density properly adjusted? See page 2-16. q Blank copies. Is the original placed face down in the document feeder tray (AR-281), face up in the document feeder tray (AR-286/AR-336) or face down on the document glass?Paper too heavy? Place the original face down in the document feeder tray (AR-281), face up in the document feeder tray (AR-286/AR-336) or face down on the document glass. Troubleshooting Copies smear if rubbed. q Paper damp? Replace with dry copy paper. Be sure to store copy paper in a dry location. Copy size is different from the selected paper size. q Paper size indicator properly set? When changing the copy paper size in a tray, be sure to adjust the paper size indicator. See page 4-4. 5-12 TROUBLESHOOTING Problem q Solution Non-standard paper used?If using special papers, feed the paper through the bypass tray. Paper misfeeds frequently. q Is paper properly installed? See pages 2-14 and 4-2. q Pieces of paper inside copier? Remove all pieces of misfed paper. See page 4-8. q Paper curled or damp? Dust, dirt, smudges appear on copies. q Document glass, document cover (AR-281) or RADF transport belt (AR-286/AR-336) dirty?CHAPTER5 Touch panel is too dark or too light. q Adjust the LCD contrast. Troubleshooting If a problem persists after checking the above, please consult your key operator prior to contacting your authorised Sharp Service Centre. Self-diagnostic function An automatic self-diagnostic function is built into this copier. Should the copier malfunction, the self-diagnostic function will locate the problem and stop the copier to prevent damage. Example Should the copier stop completely, and the message "CALL FOR SERVICE. CODE: " appear in the message display, contact your authorised Sharp Service Centre. 5 KEY OPERATOR See page 8-28. 5-13 CHAPTER 6 GENERAL INFORMATION This chapter describes general information for using this copier. q q q q Page PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . 6-8 CHAPTER6 6-1 PART NAMES AND FUNCTIONS Exterior [AR-281] [AR-286/AR-336] Exit area cover Open to remove misfed paper. Operation panel All copier controls are located here for easy operation. Document feeder tray Holds up to 30 (AR-281) or 50 (AR-286/AR-336) originals. CHAPTER6 GENERAL INFORMATION Part names and functions Front cover Open to remove misfeeds and to service the copier. [. . . ] (A3 (11" x 17")) Continuous copy First-copy time Warm-up time Copy ratio Max. Variable: 25 to 800% in 1% increments, total 776 steps (can be set in the horizontal and vertical directions independently) Fixed presets: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%, 400%, 800% (25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%, 400%, 800%) Document glass: Moving optical source (stationary platen) with automatic exposure function RADF: Same as above 33 copies/min. (A3 (11" x 17")) Reversing automatic document feeder (RADF) AR-286 AR-336 Copying speed (at 100% copy ratio) Exposure system CHAPTER6 GENERAL INFORMATION Specifications SPF: Moving original Copy paper feed Fusing system Developer system Light source Resolution Gradation Required power supply Two paper trays with automatic paper feed (500 sheets each); one bypass tray with 50-sheet automatic feed capability Heat rollers Magnetic brush development Xenon lamp Scan: 400 dpi Output: 600 dpi Scan: 256 levels Output: 2 levels (normal copying) Local voltage ±10% (For this copier's power supply requirements, see the name plate located on the left hand side at the rear corner of the copier. ) 6-8 SPECIFICATIONS AR-281 Power consumption Overall dimensions Weight Copier dimensions Max. 1. 85 kW AR-286 AR-336 1292 mm (W) x 695 mm (D) (50-7/8" (W) x 27-3/8" (D)) Approx. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AR-286




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AR-286 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.