User manual SHARP AR-281/286/336
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AR-281/286/336. We hope that this SHARP AR-281/286/336 user guide will be useful to you.
You may also download the following manuals related to this product:
SHARP AR-281/286/336 (4184 ko)
SHARP AR-281/286/336 (3450 ko)
SHARP AR-281/286/336 (16292 ko)
SHARP AR-281/286/336 (6451 ko)
SHARP AR-281/286/336 (3469 ko)
SHARP AR-281/286/336 (16428 ko)
Manual abstract: user guide SHARP AR-281/286/336
Detailed instructions for use are in the User's Guide.
[. . . ] MODEL
AR-281 AR-286 AR-336
DIGITAL COPYING MACHINE OPERATION MANUAL
Page
AR-281
· GETTING STARTED · MAKING COPIES · SPECIAL FUNCTIONS · SUPPLIES · COPIER TROUBLE?· GENERAL INFORMATION · OPTIONAL EQUIPMENT · KEY OPERATOR'S GUIDE
1-1 2-1 3-1 4-1 5-1 6-1 7-1 8-1
AR-286/AR-336
Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
In some areas, the "POWER" switch positions are marked "I" and " " on the copier instead of "ON" and "OFF". The symbol " " denotes the copier is not completely de-energized but in a stand-by condition at this "POWER" switch position. [. . . ] To cancel the SELECT STAMP function, select the SELECT STAMP function again and press the "CANCEL" key.
3-35
TEXT STAMP
WATERMARK
The WATERMARK function adds a selected watermark such as "Confidential" and "Urgent" to the copies. The watermark will be printed in gray tone at the centre of copies.
Draft
Draft
The watermarks which can be selected are: "Confidential", "Urgent", "Copy", "Preliminary", "Draft", and "Final". The darkness of the watermark can be adjusted in two levels.
CHAPTER3
SPECIAL FUNCTIONS Text stamp
1
Place the originals in the document feeder tray or on the document glass.
READY TO CO
2
Press the SPECIAL MODES key.
The SPECIAL MODES screen will appear.
READY TO COPY. SPECIAL MODES MARGIN SHIFT MULTI SHOT PAMPHLET COPY AUTO EXPOSURE ERASE COVERS IMAGE EDIT AUTO A4 PAPER SELECT OK DUAL PAGE COPY TRANSPARENCY INSERTS TEXT STAMP 100% COPY RATIO
3
Press the "TEXT STAMP" key on the touch panel.
The TEXT STAMP menu will appear.
3-36
TEXT STAMP
ECIAL MODES EXT STAMP DATE WATERMARK PRINT DIRECTION SELECT STAMP PAGE NUMBER
OK OK
4
Press the "WATERMARK" key on the touch panel.
The setting screen for WATERMARK will appear.
READY TO COPY. OK WATERMARK Confidential Copy Draft CANCEL Urgent Preliminary Final OK 1ST PAGE ONLY
CHAPTER3
ALL PAGES
WATERMARK Confidential Copy Draft OPTION
CANCEL Urgent Preliminary Final 1 O A
OPTION
5 6
Select the desired watermark to be printed.
SPECIAL FUNCTIONS Text stamp
The selected watermark will be highlighted.
CANCEL Urgent Preliminary Final N
OK 1ST PAGE ONLY ALL PAGES
Select the pages to be printed with the watermark.
Indicate whether the watermark is to be printed only on the first page or on all pages, by pressing the "1ST PAGE ONLY" or "ALL PAGES" key.
Confidential Copy Draft OPTION
Urgent Preliminary Final
7
To adjust the exposure, press the "OPTION" key. Otherwise, proceed to step 9.
The following screen will appear.
READY TO COPY. OK WATERMARK DARKNESS CANCEL OK
TERMARK DARKNESS
CANCEL
OK
8
Adjust the darkness of the watermark.
Press the
key to darken or the
key to lighten. key.
To return to the previous screen, press the
3-37
TEXT STAMP
9
OK CANCEL
CHAPTER3
SPECIAL FUNCTIONS Text stamp
Press the lower "OK" key.
The TEXT STAMP menu will appear again.
OK
DATE WATERMARK PRINT DIRECTION
SELECT STAMP PAGE NUMBER
10
Select the print direction.
If the PAMPHLET COPY function is used with this function, the portrait orientation ( ) must be selected.
OK OK DATE WATERMARK SELECT STAMP PAGE NUMBER
11
Press the upper "OK" key.
1 4 7
AUDIT CLEAR
2 5 8 0
3
6
INT
CLEAR ALL
CA
START
12 13 14
Make all other desired copier selections and enter the desired number of copies. Press the START (
) key.
9
PROGRAM
If the document feeder is used, scanning of originals and copying will start. If the document glass is used, proceed to the next step.
P
PLACE NEXT ORIGINAL. READ-END
Replace the finished original with the next original after the START ( ) key indicator lights up, and then press the START ( ) key. Then, press the "READ-END" key on the touch panel.
AUTO EXPOSURE
AUTO A4 PAPER SELECT
100% COPY RATIO
Copying will start at this time. Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets of originals larger than A4 (8-1/2" x 11") can be scanned. To cancel the WATERMARK function, select the WATERMARK function again and press the "CANCEL" key.
3-38
TEXT STAMP
PAGE NUMBER
The PAGE NUMBER function adds page numbers to the copies.
The page number format can be selected from three types. The page number print position is automatically selected depending on the selected page number format. If reduction or enlargement is used with this function, the print position may move or the page numbers may not be printed. CHAPTER3
SPECIAL FUNCTIONS Text stamp
1
Place the originals in the document feeder tray or on the document glass.
READY TO CO
2
Press the SPECIAL MODES key.
The SPECIAL MODES screen will appear.
READY TO COPY. SPECIAL MODES MARGIN SHIFT MULTI SHOT PAMPHLET COPY AUTO EXPOSURE ERASE COVERS IMAGE EDIT AUTO A4 PAPER SELECT OK DUAL PAGE COPY TRANSPARENCY INSERTS TEXT STAMP 100% COPY RATIO
3
Press the "TEXT STAMP" key on the touch panel.
The TEXT STAMP menu will appear.
3-39
TEXT STAMP
ECIAL MODES EXT STAMP DATE WATERMARK PRINT DIRECTION
CHAPTER3
SPECIAL FUNCTIONS Text stamp
OK OK SELECT STAMP PAGE NUMBER
4
Press the "PAGE NUMBER" key on the touch panel.
The setting screen for PAGE NUMBER will appear.
READY TO COPY. OK FIRST PAGE NUMBER 1
5 6
Select the desired page number format.
The selected page number format will be highlighted.
OK CANCEL -1-, -2-, -3-. . OK FIRST PAGE NUMBER 1
(0~)
Select the starting page number.
Use the number.
or
key to increment or decrement the page
If the page number format "1/5, 2/5, 3/5. . " has been selected in step 5, the starting page number is fixed to 1 and cannot be changed.
OK CANCEL -1-, -2-, -3-. . OK FIRST PAGE NUMBER 1
(0~)
7
Press the lower "OK" key.
The TEXT STAMP menu will appear again.
DATE WATERMARK PRINT DIRECTION
SELECT STAMP PAGE NUMBER
8
Select the print direction.
If the PAMPHLET COPY function is used with this function, the portrait orientation ( ) must be selected.
3-40
TEXT STAMP
OK EXT STAMP DATE WATERMARK PRINT DIRECTION SELECT STAMP PAGE NUMBER OK
9
Press the upper "OK" key.
CHAPTER3
1 4 7
AUDIT CLEAR
2 5 8 0
3
6
INT
CLEAR ALL
CA
START
10 11 12
Make all other desired copier selections and enter the desired number of copies. Press the START (
) key.
SPECIAL FUNCTIONS Text stamp
9
PROGRAM
If the document feeder is used, copying will start after all originals are scanned. [. . . ] The lists printed with the key operator programs are included in "OTHERS". When the "TOTAL COUNT. " key is pressed, the following display will appear.
KEY OPERATOR PROGRAMS TOTAL COUNT. COPIES DOCUMENT FEEDER DUPLEX STAPLER OTHERS : 022, 500 : 012, 000 : 007, 500 : 003, 000 : 000, 500
PRINT OK
The total counts for all units in use will be displayed. Press the "OK" key to exit the program.
KEY OPERATOR'S GUIDE Key operator programs
Program List Printout
This program is used to print out the list of available key operator programs.
Press the "PROGRAM LIST PRINTOUT. " key.
The copier will start printing. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AR-281/286/336
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AR-281/286/336 will begin.