User manual SHARP 28LS-92EC

[. . . ] Contents Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press button to increase sharpness level. WPGV H@ 76G6 I8@ HP 9@ 6WG @AA@8U @RV 6GDa@S TUPS @ HP IP PI PAA Press button to decrease sharpness level. Picture Menu To enter the Picture menu directly, press the GREEN button, or Press M button, now you are in Main menu. In the Main menu, select PICTURE using or button, then enter the Picture menu pressing or button. %5, *+71(66 &2175$67 &2/285 6+$531(66 02'( 6725( Setting Hue (During Playback NTSC system, this will appear in AV mode only when NTSC video source is applied. Otherwise, HUE option is invisible in Picture menu. ): Using or button select Hue. Press button to increase hue level. 6281' 3, &785( Press button to decrease hue level. Center value is indicated with the two reciprocal arrows. )($785( , 167$// 352*5$0 - 10 - %5, *+71(66 &2175$67 &2/285 6+$531(66 +8( 02'( 6725( 6281' 3, &785( )($785( , 167$// Mode This item is used to change the picture size. AUTO Your TV changes the picture mode automatically, according to the transmission of the selected channel. For example, your TV is 4:3 mode, but the transmission of that channel is in 16:9 mode. If you select the AUTO mode, the TV is switched to 16:9 mode automatically. If the TV is in 4:3 mode and the picture ratio of the channel is also 4:3, there will be no affect selecting the picture mode to AUTO mode. For the Picture Mode selection in AV1 the pin 8 (of Scart) value is used. In RGB modes the Picture Mode can be 4:3 or 16:9 (Auto mode is not available. ). 352*5$0 Sleep Timer As you enter the Feature menu, SLEEP TIMER will be the first selected option. Use or button to change the Sleep Timer values between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, 1:15:00, 1:30:00, 1:45:00 and 2:00:00. If sleep timer is activated it is displayed with the TV status and erased with it after 3 seconds. TGQUDH@S 8CDG9GP8F G6IB V6B@ PAA PAA @IBGDTC If there is left only one minute of the down counting of the timer, it is displayed automatically on the upper left of the screen, and stayed there until finishing. Then TV goes automatically to stand-by. %5, *+71(66 &2175$67 &2/285 6+$531(66 02'( 6725( Child Lock You can use this feature to prevent children turning on TV or changing programs or adjustments etc. The CHILD LOCK feature can be set by or button to either ON or OFF. When OFF is selected, there will be no difference in the operation of your TV. When ON is selected, the TV can only be controlled by the remote control handset. In this case, the front panel buttons (except the Power On/ Off button) will not work. Note: In the Picture menu if you press Flashback ( ) button the adjustments switch themselves to the factory settings. To Store the Settings Press or button on STORE option to store Picture menu settings. The stored picture mode setting will be valid only in current program. However, the other stored values in Picture Menu will be valid for all the programmes. TGQUDH@S 8CDG9GP8F G6IB V6B@ PAA PAA @IBGDTC Selecting Menu Language %5, *+71(66 &2175$67 &2/285 6+$531(66 02'( 6725( Menu language can be chosen by pressing or button on LANGUAGE item. 2. Feature Menu To enter the Feature menu directly, press the YELLOW button, or Press M button, now you are in Main menu. [. . . ] See also the booklet supplied with your decoder. Connect a decoder with an aerial socket to the TV Connect the aerial cable. Connect a decoder without an aerial socket to the TV Connect the decoder to your TV with a eurocable (RCA Jack Cable) to SCART socket. When your decoder has a Euro connector / RCA Jack you can obtain better picture quality if you connect a eurocable (RCA Jack Cable) to SCART socket. TV and Video Recoder (VCR) Connect the aerial cables. Better picture quality can be obtained if you also connect a eurocable to SCART socket. NTSC Playback Connect NTSC VCR player to SCART socket at the back of the TV. Then, press (;7 button to select SCART. - 16 - Connecting external equipment Before connecting anything Switch off all equipment. [. . . ]