User manual SHARK SC620

[. . . ] Use caution when draining unit after use as there may be hot water in the unit. Never use any chemicals or substance other than tap water in the machine. Burns can occur from touching HOT METAL PARTS, HOT WATER OR STEAM. IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock, or injury: · Do not leave the Garment Steamer plugged in when unattended. Unplug the electrical cord when not in use and before servicing or refilling water tank. [. . . ] If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. CAUTION: Hose can become hot during use. Hold the steamer head by the handgrip and never by the hose. 2 3 GETTING TO KNOW YOUR GARMENT STEAMER Components OPERATING INSTRUCTIONS Power "On" Light (green): This light will illuminate when the "ON" switch is depressed and the unit is turned on. It will remain on until the unit is turned "OFF" or until the water tank is emptied. To assemble the garment rod, insert one of the extensions into the other by depressing the button on the extension (marked C) so that you can insert into the other extension (marked D). Turn the extension until the button comes out of the opening and you hear a click. 2) Caution: Always unplug before refilling. Important: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance. Use tap water or distilled/purified water if the tap water in your area is very hard. Assembling Your Garment Steamer Step 1: Assembling Garment Rod 1. First attach the garment hook to the garment rod by screwing the garment hook (marked A) into the garment rod extension (marked B). 2 Once you have assembled the garment rod, insert the bottom section of the rod (marked E) into the adapter hole in the upper housing of the unit (marked F) and turn 90° until it is locked in place. 6. Garment Hook Garment Rod Extensions (3) Water Tank Power Cord Wheels Garment Brush 7. 12. Steamer Head Steam Diffuser/Handgrip Steamer Hose On/Off Switch Power On Light (Green) Front Caster Wheel Fig. (4. 5 liters) 220°F 4 5 OPERATING INSTRUCTIONS cont. Step 2: Assembling Steamer Hose 1. Insert end of steamer hose with the long tube bushing (marked A) into the adapter hole (marked B) on the unit. To attach the garment brush (marked E) onto the diffuser (marked F), place the two hinges at the back of the garment brush (see fig. Swing the garment brush up against the bottom of the steam diffuser until the locking tab engages. OPERATING INSTRUCTIONS cont. Preparing Garment Steamer for Use CAUTION: Before filling the water tank, check to make sure that the water tank sits securely in the unit before proceeding. Check for sediment or build-up in the base of the unit reservoir and water tank. Follow steps for cleaning and storing the unit if water was accidentally left in the water tank during storage of the unit on page 8. Place the steamer hose with the nozzle end up on the garment hook. (See fig. 4 2. To attach the steam diffuser, grasp steam diffuser in one hand and the hose in the other. Depress the locking button on the hose end until the locking button engages the hole in the steam diffuser. [. . . ] Be sure to attach tag to item before packing with your name, complete address and phone number with note giving purchase information, model number and what you believe is the problem with item. We recommend you insure the package (as damage in shipping is not covered by your warranty). Mark the outside of your package "ATTENTION CUSTOMER SERVICE". OWNERSHIP REGISTRATION CARD Please complete and return within ten (10) days of purchase in order to validate the foregoing Limited Warranty. . The registration will enable us to contact you in the event a product defect is discovered. [. . . ]