User manual SHARK SC505

[. . . ] Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with item. We recommend you insure the package (as damage in shipping is not covered by your warranty). Mark the outside of your package "ATTENTION CUSTOMER SERVICE". We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. OWNER'S MANUAL Model SC505 120V. , 60Hz. , 10 Amps FOR CANADIAN CONSUMERS ONLY Please fill out and mail the product registration card within ten (10) days of purchase in order to validate the foregoing Limited Warranty. [. . . ] · Do not handle plug or vacuum with wet hands or operate without shoes. Keep free of dust, lint, hair and anything else that may reduce air flow. · Keep end of hose, wands and other openings away from your face and body. · Using improper voltage may result in damage to the motor and possible injury to the user. Correct voltage is listed on rating label. ORDERING REPLACEMENT DUST CUP FILTERS TO ORDER REPLACEMENT HEPA FILTERS Item # XSH602 for Model SC505 Call: 1-866-98SHARK (1-866-987-4275) Monday to Friday 8:30 A. M. Eastern Standard Time FOR TECHNICAL SUPPORT for Model SC505 Call: 1-800-798-7398 Monday to Friday 8:30 A. M. Eastern Standard Time or visit our website: www. sharkvac. com Please Note: The HEPA Filter is washable. It should, however, be replaced every six (6) months to ensure peak performance of your vacuum. They should however be replaced every three (3) months to ensure peak performance of your vacuum. Make sure that ALL filters have been completely air dried for 24 hours before re-installing back in the vacuum. 8. Important: 9. 14. SAVE THESE INSTRUCTIONS For Household Use Only WARNING: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). · When the filter is dry, replace into the unit and replace the HEPA filter and dust cup container. · A severely soiled or clogged filter should be thoroughly washed with fresh tepid water. Before you start vacuuming, make sure to remove large or sharp objects that might damage the dust cup debris screen. CAUTION: The suction hole must Pre-Motor Filter be open, free of any obstructions at all times. Otherwise, the motor will overheat and could become damaged. Warning: Always empty the dust cup container and clean the HEPA filter and Debris Screen before each use and during prolonged usage. Never over fill the dust cup container remove dirt and clean the HEPA filter and debris screen when dirt in dust cup is at or below the "MAX" level during prolonged usage or risk motor damage. If you wash the Hepa filter, make sure that it is completely dry before inserting back in the vacuum. It should, however, be replaced every six (6) months to ensure peak performance of your vacuum. They should however be replaced every three (3) months to ensure peak performance of your vacuum. Important: Make sure that ALL filters are completely dry before re-installing back in the vacuum. Changing & Cleaning the Post Motor Filter 3 8 The post motor filter is a washable filter but should be replaced every three (3) months. · Remove the filter cover from the front of the unit and remove the filter. · Rinse the post motor filter in lukewarm water and air dry the filter completely for 24 hours. [. . . ] When using the unit with the shoulder strap, the unit will touch the body of the user. Therefore, make sure that the unit body is cool before you use with the shoulder strap. If during use, the vacuum gets too warm, allow it to cool before continuing to use. Crevice Tool For radiators, crevices, corners, baseboards and between cushions. [. . . ]