User manual SEVIC SBL0101MP

[. . . ] STEREO -6- Replacing the batteries f the remote control has no function or if the operating range is reduced, replace the old battery with new one. Follow the arrow (1) slide the tab to the right while pulling the cover away at the same time. 2. Place the new battery in the tray and slide the cover back into place. 3. Make sure the cover is locked into place. -7- UNIT INSTALLATION Installation Method 1: Din Front-Mount Install the Mounting sleeve into the dashboard. Bend as many claws outward for tight fit, to lock the sleeve into place. -8- Install the trim bezel to the unit. [. . . ] Simply press and hold the EJECT button to adjust according to your preference. - 16 - Restore Default Angle Turn OFF the unit; then press preset buttons 1-6 and power the unit back ON. The motor and gear drives are now back to their factory positions. DVD/VCD/CD/MP3 OPERATIONS Inserting disc Press EJECT button, the front panel will slide down to Position 1; then insert a disc into the Disc Loading Slot; the panel will slide back automatically. Ejecting a Disc Press EJECT button, the front panel will slide down to Position 1; then eject a disc; the panel will slide back automatically after 30 seconds , if no action is taken. Note: The EJECT button on the remote control will perform the same functions. Stop During movie playback, press the STOP button once; the DVD player memorizes the location where you stopped (press PLAY button to resume playing from the memorized location). If you press the STOP button twice, the playback will start from the beginning of the disc when you press again on the PLAY button. F. FWD/F. REV Press the F. FWD/F. REV button to select fast forward / reverse search. Press PLAY/PAUSE to resume to normal playback. - 17 - Previous/Next Press the Previous/Next button to go to the PREVIOUS/NEXT chapter , track or song. Direction Press the direction buttons (UP/DOWN/LEFT/RIGHT arrow) to move the cursor to the selected item Display Press the DISPLAY button to display the current playback information on the screen. Repeat Press the repeat button to repeat the same track, press it twice to repeat all tracks. When playing a DVD movie, pressing once will repeat the same chapter but pressing twice will repeat the entire title. Angle Press the Angle button during playback to select different viewing angles with interactive DVD media. Audio When playing a DVD disc, press the Audio button to select one of the available languages. Subtitle For DVD disc, press the Subtitle button to select one of the available languages. Program When playing a VCD disc (PCB off) or CD disc, press the Program button to enter the program status; Press the number buttons to enter the number of the track you want to play. Slow Press the SLOW button to activate the playback in slow motion (DVD mode only. ) - 18 - P/N Press the P/N button to select the video output format (PAL/NTSC). When the power is off, push the SEL button to set up the initialization volume of TP, no matter how loud the volume is in the other mode, it will broadcast the traffic announcement in the same sound level; To increase the volume level of the TA, set press the SEL button until TAVOL is displayed on the LCD, then use the volume button to adjust the level. When listening to the traffic announcement, use the volume button to adjust the level, but if the volume is louder than the TA initialization volume level, it will not be possible to adjust the volume. When the signal of the of the Traffic-Program identification (TP) is bad, there will be a beep sound. The volume setup of the beep sound is the same as the TA initialization volume. During the station search the letters "PTY" will flicker on the display; when the station is found "PTY" will be displayed without flickering. In PTY mode, press the AST button to scan and store stations with the 1-6 number buttons. [. . . ] In this case, the warranty and the period of the first warranty will remain applicable). 5) Damages not covered: As the device is recognized as being in good working condition and without noticeable defect, THE WARRANTY DOES NOT COVER: transport costs, nor charges relating to an intervention at the address of the purchaser. Scratches, splinters or marks in the packaging of the device or its accessories which were not noted at the time of delivery / breakable accessories, except in case of manufacturing defects recognized by our technical department. Moreover, we wave any liability for general damages resulting from a defect in the functioning of our devices and which are not relating to the devices themselves. [. . . ]