User manual SEVERIN WK 3342

[. . . ] Make sure that the supply voltage corresponds with the voltage marked on the rating label. Pouring spout with sieve Important safety instructions  Before the appliance is used, the main unit as well as any attachment fitted should be checked thoroughly for any defects. ρ¬ The power cord should be regularly examined for any signs of damage. In the event of such damage being found, the appliance must no longer be used. [. . . ] ρ¬ The appliance must be used only on a heatresistant and level surface, impervious to water stains. ρ¬ Do not allow the appliance or its power cord to come into contact with open flames or any hot surfaces such as hotplates. ρ¬ Do not let the power cord hang free, and keep the cord well away from hot parts of the housing. ρ¬ Always remove the plug from the wall socket - in case of any malfunction, - after use, and also - before cleaning the appliance. ρ¬ When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself. ρ¬ No responsibility is accepted if damage results from improper use, or if these instructions are not complied with. ρ¬ This appliance is intended for domestic or similar applications, such as in - staff kitchens, offices and other commercial environments, - agricultural areas, - hotels, motels etc. ρ¬ In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. Thermal safety cut-out The preset thermal safety cut-out protects the heating element from overheating should the appliance be erroneously switched on without any water, or if the heating element is calcified. Once the safety cut-out has switched 9 off the kettle, it must be allowed to cool down sufficiently, or must be descaled before it is switched on again. €“ Push the release button to open the lid, and fill the container with water to the desired level, observing the Min. Info: Once the appliance is connected to the mains or the container is placed on its base, the temperature selection buttons light up briefly in the sequence red-green. €“ To turn the appliance on, use the appropriate button, which will start flashing red. During the heating period, the temperature can be changed at any time. €“ As soon as a certain temperature level has been reached during the heating process, the corresponding temperature selection button shows a green light. €“ After reaching boiling point (or the selected temperature), the appliance switches off automatically. A triple beep signal is heard and the corresponding button shows a steady light. €“ Around 30 seconds after the appliance has switched off, the temperature button indicator lights will also go out. €“ To interrupt the heating process, the appliance can be switched off by pressing the appropriate temperature button again. [. . . ] Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. This guarantee does not affect your statutory rights, nor any legal rights you may have as a consumer under applicable national legislation governing the purchase of goods. [. . . ]