User manual SEVERIN VKS 8816

[. . . ] Do not block the air inlets of the appliance panelling or the design with built-in furniture. When positioning the appliance, ensure the supply cord is not trapped or damaged. Do not locate portable multible socket-outlets or portable power supplies at the rear oft he appliance. Before plugging it in, check for possible damage during shipping in the power cord or in the appliance itself. [. . . ] Before you fill the appliance with food, let it work for 1 hour, so that the target temperature can be reached. The surrounding temperature, at which the appliance can be operated, can be taken from the appliance specification sheet at the end of this manual. Bear in mind that you can pull the power Protect the appliance from direct insolation. If this, however, cannot be avoided, you should put isolation between the heat source and the appliance. The installation of the fridge directly under a board or a cabinet is disallowed. The unevenness of the floor can be compensated with the two vertically adjustable screw-in feet in the front, so that safe stability is attained. Installation measures If the appliance is placed sideways on a wall, you will leave a lateral gap of at least 60 mm, so that the doors of the appliance can open in a 90-degree angle. In order to be able to remove the VeggiBox completely from the appliance, detach the bottle compartment if necessary. Do not cover possible existing ventilation openings in the back area of the top cover plate!Before you connect the appliance, you have to make sure that itself and the power plug do not show any transport damages. The mains voltage has to correspond to the one stated on the tool identification plate. The appliance complies with the guidelines that are obligatory for CE marking. Do not connect the appliance to an inverter · The power plug should not touch the back- The appliance can be put into operation by plugging the mains plug into the point. 5 minutes after plugging in the mains plug before setting the temperature controller to the desired position. The temperature adjustment for the refrigerator compartment is set via the controller on the lighting inside the refrigerator. place it in a central position (3 - 4) to set an optimal temperature for normal use. The more you turn the knob clockwise (5 - 7), the lower the temperature in the refrigerator will be. The more you turn the knob counterclockwise (1 - 2), the higher the temperature in the refrigerator will be. Make sure the desired temperature has been reached both in the refrigerator and in the freezer by using a thermometer. VeggiBox The VeggiBox serves as the optimal storage for fruits and vegetables. interior Lighting Do not take off the cover of the interior lighting. Store the food only packaged or covered in the refrigerator, in order to sustain the flavour and the freshness. [. . . ] The warranty expires in the case of an intervention that is not authorized by us. If a repair is necessary, call and write an e-mail to our after-sales service. The legal warranty laws against the vendor and possible vendor warranties stay untouched. If a repair is necessary, please contact the service hotline directly with an explanation of the defect. [. . . ]