User manual SEVERIN KP 1071

[. . . ] and similar accommodation , - in bed-and breakfast type environments. This appliance may be used by children (at least 8 years of age) and by persons with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, provided they have been given supervision or instruction concerning the use of the appliance and fully understand all dangers and safety precautions involved. Children must not be permitted to carry out any cleaning or maintenance work on the appliance unless they are supervised and at least 8 years of age. The appliance and its power cord must be kept well away from children under 8 at all times. [. . . ] The power cord must be kept well away From any hot part of the appliance. no responsibility will be accepted if Damage results from improper use, or if these instructions are not complied with. Start up Before using the appliance for the first time, remove any remaining packaging and wipe the surface with a damp cloth. Suitable cookware This appliance must only be used with Cookware suitable for use with inductiontype hot-plates, eg stainless-steel with a ferro-magnetic base, or cast-iron or enamelled steel cookware. Cookware can be tested for its suitability by simply holding a magnet to the base; if the magnet is attracted, the cookware is suitable for use with this appliance. If unsuitable cookware is used, the appliance will respond with an error message (see `Troubleshooting' table). It is therefore important to select the appropriate temperature level for the cookware in use, and to follow the information provided by the cookware's manufacturer. Setting the power output / temperature This appliance may be operated by either of its control features, `Power' or `Temperature' . For heating water, steaming and similar cooking applications, we recommend using the `Power' control. For frying, deep-frying and the like, the `Temperature' control should be used. Using the + and ­ selection keys, the power setting can be adjusted from 1 to 10 as required. Using the + and ­selection keys, the required temperature level can be selected in steps of 20 °C within a range from 60 °C to 240 °C. Timer The timer function allows for setting the intended cooking time. Once the desired function has been selected, press the operating key , and then use the + and ­ selection keys to select the cooking time. Every press of the + key increases the cooking time by 5-minute intervals, while pressing the ­ key reduces the cooking time by 1 minute. Once the pre-programmed time has elapsed, a beep signal is heard and the appliance goes into stand-by mode. If no timer setting is selected, cooking can only be interrupted by pressing the On/ Stand-by switch. Function indicators The function indicator shows which of the `Power', `Temperature' or `Timer' functions has been selected. Automatic recognition of suitable cookware The appliance detects whether any cookware has been placed on the plate, And whether it is suitable for this appliance. If any function is selected with non-suitable cookware on the plate, a number of beeps will be heard, and the display will show the error message ---. Residual heat indicator In standby mode, any residual heat in the plate(s) is indicated on the display. The display shows the indicator L for low Residual heat in the plate(s). [. . . ] If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase. Troubleshooting In the case of problems, the following error messages may appear on the display: The mains voltage is below 160 V. The unit is in stand-by mode, no information shows on the display, and beep signals are heard Connect the unit to an outlet installed in accordance with the regulations, with a supply voltage between 220 and 240 V. [. . . ]