User manual SEVERIN KM 3901

[. . . ] Caution: Keep any packaging materials well away from children: there is a risk of suffocation. The attachments designed for cutting, slicing and grating have extremely sharp blades. To prevent the possibility of severe injury, use extreme care when handling or cleaning these attachments. To prevent the risk of injury, always remove the blades carefully before emptying or cleaning the blender jug and chopping/ mincing insert. [. . . ] €“ Fit the required attachment and put the ingredients into the blender jug which has a maximum operating capacity of approx. €“ Insert the plug into the wall socket; either use the rotary control to select the desired programme, or select the speed manually. €“ Once processing is finished, switch off and remove the plug from the wall socket. Wait until the motor has come to a complete standstill, and then remove the blender jug by following the steps above in reverse order. Pulse function The appliance is switched on as long as the operating button is depressed; once it is released, the appliance goes back to stand-by mode. Blending/mixing This programme is designed for automatic blending, stirring or kneading of cake dough etc. Once the programme has finished, the appliance switches back to stand-by mode. To interrupt the current programme, press the programme button again, when the appliance will return to stand-by mode. Chopping/mincing This programme is designed for the 11 automatic chopping/mincing of vegetables, meat etc. Once the programme has finished, the appliance goes back to stand-by mode. To interrupt the current programme, press the programme button again, when the appliance will return to stand-by mode. The main indicator lamp and the programme indicator lamp ‘Pulse’ both light up. Maximum fill capacity: 1400 g – Ensure that the blender jug is safely locked; then fit the drive shaft and kneading tool inside the jug. pushing the ‘Pulse’ button provides a brief burst of maximum speed. Always start with the lowest setting when using manual speed selection and slowly increase as necessary. After its first rising phase, leavened dough must be kneaded by hand and cannot be automatically kneaded a second time. 3 kg of dough, fill the blender jug with a maximum of 800g flour, 400 ml water and 100 ml cream. Chopping blade The chopping blade is designed for stirring cold liquids (e. Maximum fill capacity: 1000 g – Remove the protective cover from the blades. Ensure that the blender jug is safely locked, before fitting the drive shaft and chopping blade inside the jug. [. . . ] The main unit housing may be wiped with a slightly damp, lint-free cloth. €“ All accessory parts should be thoroughly cleaned immediately after use, using hot water and a mild detergent, or in a dishwasher. Disposal Do not dispose of old or defective appliances in domestic garbage, this should only be done through public collection points. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. [. . . ]