User manual SEVERIN KM 3887

[. . . ] To prevent the possibility of severe injury, use extreme care when handling or cleaning these attachments. Caution: always use the appropriate pestle to feed food into the bowl. Do not touch any moving parts during operation - this can be extremely dangerous. Whenever the blender jug is not being Used, ensure that the safety lid is correctly fitted over the blender mounting. [. . . ] Note: - Put the ingredients into the bowl; for 1kg of dough, about 600g of flour and 400 ml of water are needed. When making the dough, the appliance should not run for more than 20 seconds at a time, after which it should be allowed to cool down for 2 minutes. Once the dough has reached a firmer consistency, continue kneading at speed level 3. Whipping (Emulsifying) - Place the safety lid on the blender mounting and lock it by turning anticlockwise. - Attach the bowl and fit the beater insert to the drive shaft in such a way that it almost touches the bottom of the bowl. - Place the lid on the bowl and turn it anti-clockwise to lock; the arrow-mark on the lid must be aligned with the corresponding dot on the housing. - For safety reasons, use the appropriate Pestle at all times when feeding the ingredients down the food chute. Operation settings - Always start processing at speed level 1 and gradually increase the speed as necessary. Slicing and shredding/grating - Place the safety lid on the blender mounting and lock it by turning anticlockwise. - When properly inserted, the slicing or shredding insert must be flush with the surface of the disc. - Attach the bowl and fit the blade mounting to the drive shaft in such a way that the drive shaft extension almost touches the bottom of the bowl. - Place the lid on the bowl and turn it anti-clockwise to lock; the arrow-mark on the lid must be aligned with the corresponding dot on the housing. - For safety reasons, use the appropriate pestle at all times when feeding the ingredients down the food chute. - Always switch the appliance on before feeding the ingredients down the food chute. When processing larger quantities, the bowl must be emptied from time to time. - Place the juicer lid on the bowl and turn it anti-clockwise to lock; the arrowmark on the lid must be aligned with the corresponding dot on the housing. - For safety reasons, use the appropriate pestle at all times when feeding the ingredients down the food chute. - While the appliance is running, feed the prepared pieces of fruit into the chute, using the pestle to push it lightly down. - Caution: too much pressure may result in damage to the motor or the insert. - When processing larger quantities of fruit or vegetables, the filter basket and the juice container must be emptied from time to time. Blender - Remove the safety lid from the blender mounting by turning it clockwise to unlock. - Place the blender jug on its mounting and turn it anti-clockwise to lock. [. . . ] If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase. The plug from the wall socket and wait until the motor has come to a complete standstill. To avoid the risk of electric shock, do not clean the housing with water and do not immerse it in water. [. . . ]