User manual SEVERIN KM 3885

[. . . ] After switching off, always wait until the motor has come to a complete standstill. This appliance should only be used with the attachments provided by the manufacturer and in accordance with the purposes described in this manual. Always remove the plug from the wall socket - after use, - in case of any malfunction and - during cleaning. When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself. [. . . ] - Place the drive shaft extension firmly on the drive shaft in such a way that the extension almost touches the bottom of the bowl. - Fit the kneading insert over the shaft extension and push it firmly down as far as it will go. Ensure that the recess on the small safety lid is properly fitted over the corresponding protrusion on the main lid of the bowl before turning it clockwise to lock it. - For safety reasons, use the pestle at all times when feeding the ingredients into the food chute. - Short-term operation When using the kneading function, please note that the appliance is designed for short-term operation only, i. Switch off the appliance afterwards and allow sufficient time for it to cool down before resuming operation. Once the dough has reached a firmer consistency, continue kneading at speed level II. - Place the drive shaft extension firmly on the drive shaft in such a way that the extension almost touches the bottom of the bowl. - First fit the L-shaped edge of the selected insert (slicer or grater) into the side of its mounting. (To remove the insert, push it up from below on this side until it comes free from the mounting. ) - When properly inserted, the upper surface of the insert must be flush with the surface of the disc. - Fit the insert mounting with the grating plate inserted onto the shaft extension. Corresponding protrusion on the main lid of the bowl before turning it clockwise to lock it. - For safety reasons, use the pestle at all times when feeding the ingredients into the food chute. - Always switch the appliance on before feeding the ingredients into the food chute. When processing larger quantities, the bowl must be emptied from time to time. Functions and operation settings - The slicer can be used for slicing cucumber, potatoes, carrots etc. - For grating cabbage , carrots or celery etc , the grater should be used. Blender - Place the large safety lid on the bowl mounting and turn it clockwise to lock it. - Place the blender jar on the blender mounting and turn it clockwise to lock it. - Put in the liquid ingredients, then put the blender lid in place and lock it clockwise. - After processing, switch off the appliance and remove the blender jar by slightly turning it anti-clockwise and lifting it off. [. . . ] Use a suitably thick piece of cloth to hold the blade in position and remove the drive shaft coupling from underneath the blender jug by turning it in a clockwise direction until it can be taken off. To reassemble, first place the sealing disc onto the blade shaft from below with its flat side first, then fit the blade into the blender jar and onto the shaft. Gebruik Controleknop De controleknop heeft de volgende instellingen: II Het apparaat is aan - hoge power I Het apparaat is aan - lage power 0 Het apparaat is uit. Anslutning till vägguttaget Se till att nätspänningen i vägguttaget motsvarar den som är märkt på apparatens skylt. [. . . ]