User manual SEVERIN HT 0137

[. . . ] 8 GB Hair dryer Dear Customer, Before using the appliance, please read the following instructions carefully and keep this manual for future reference. The appliance must only be used by persons familiar with these instructions. Connection to the mains supply The hair dryer should only be connected to an earthed socket installed in accordance with the regulations. [. . . ] By fingers or hair), and that no fluff or fibre particles are allowed to accumulate in the air intake. A blockage in the air-flow system may cause the integral thermal safety cut-out to switch off the appliance. Should this occur, immediately disconnect the appliance from the mains power and allow sufficient time for it to cool down before the blockage is removed and the appliance is switched on again. To prevent damage to the power cord, - do not bend or kink the cable, especially where it leaves the housing, - do not pull on the cord, - do not coil the power cord around the appliance. Always switch off and remove the plug from the wall socket after use, as well as - in cases of malfunction, and - during cleaning. When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself. Do not place the appliance on any surfaces sensitive to heat during or immediately after use. No responsibility will be accepted if damage results from improper use, or if these instructions are not complied with. This appliance is intended for domestic or similar applications, such as in - shops, offices and other similar working environments, - agricultural areas, - hotels, motels etc. In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. Styling nozzle The styling nozzle can be fitted to the air outlet to facilitate shaping the hair during blow drying. Cool function The cool function can be used at any time during the drying process. It will supply cooler air, which helps firming and shaping the hair. 10 Operation Connect the hair dryer to a suitable wall socket and use the slide switch to select the desired power setting. Cleaning and care Before cleaning the hair dryer, remove the plug from the wall socket and let the appliance cool down completely. [. . . ] This guarantee does not affect your statutory rights, nor any legal rights you may have as a consumer under applicable national legislation governing the purchase of goods. If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase. [. . . ]