User manual SEVERIN GS 7521

[. . . ] During use, do not lift off the face mask or the cover of the aroma diffuser. Do not allow the power cord to hang free; Do not operate the charging base near baths, showers, wash basins, swimming pools or any other water container. We recommend operating the appliance with an additional earth-leakage circuitbreaker having a rated tripping current not exceeding 30mA. [. . . ] No responsibility will be accepted if damage results from improper use, or if these instructions are not complied with. This appliance is intended for domestic use only and is not designed for medical or commercial applications. In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The addresses can be found in the appendix to this manual. Before using this unit for the first time Initially, the unit should be cleaned as described in General care and cleaning. Switch settings The rotary control switch allows for the following settings: 0 The unit is switched off. Caution: to avoid any effect detrimental to the facial skin, the high-power setting (2) should be used only for accelerated preheating of the appliance. The control switch should be returned to position `1' before the face is held over the face mask. Aroma diffuser The aroma diffuser is designed to add different aromas to the steam during the inhalation and cleansing process. Put a few drops of aromatic oil or herbal additive onto a cotton cloth, place it inside the aroma diffuser and replace the cover. Steam output control The steam output is controlled by turning the ring on the base of the face mask. Turning the ring in an anti-clockwise direction will reduce the current steam output. Use - Fill the reservoir with cold, clean water up to the maximum level mark. - Place the translucent mask onto the base and lock it by turning in an anti-clockwise direction. - Use the rotary control switch to turn the appliance on; the indicator light comes on. - As soon as steam starts coming out, the appliance is ready for use; you can now position your face over the mask. 5 Caution: ensure that the control switch is set to position `1'. Do not place your face directly onto the mask. [. . . ] Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. [. . . ]