User manual SEVERIN BR 7961

[. . . ] Always check the dust bag for any signs of damage before connecting the appliance to the power supply. Do not operate the vacuum cleaner - if no dust bag is inserted or if the dust bag is damaged, - if the dust bag full indicator shows that the dust bag has reached its maximum capacity. A considerable risk exists especially where ears and eyes are Keep the nozzle away from the head at all times. When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself. [. . . ] - Remove any exterior and interior packaging materials and make sure that the dust bag, the motor-protection and exhaust air filters are correctly inserted. Thermal safety cut-out This vacuum cleaner is equipped with an integral thermal safety cut-out, which automatically switches the appliance off in case of overheating (e. Should this occur, remove the plug from the wall socket and let the appliance cool down for a minimum of one hour. The vacuum cleaner may then be used again after the blockage has been removed. Main power switch with suction power regulator The appliance is switched on and off by pushing the main power switch. Accessories The accessories can be stored in the accessories holder, which attaches to the tube Multi-purpose tool The multi-purpose tool is especially suitable for cleaning large areas. This brush tool is suitable for cleaning uneven areas such as upholstered surfaces, picture frames, rows of books etc. crevice tool The crevice tool is designed to clean difficultto-reach areas such as grooves , niches , corners and crevices. Models with parquet-brush The parquet brush is used for high-grade hard floors such as laminate floors, parquet or ceramic tiles. Changing dust bag or filters Before any filter is changed, always switch the appliance off and remove the plug from the wall socket. When replacing the motor or exhaust-air filter, it may be necessary to cut the filters to size with a pair of scissors. The indicator shows when the dust bag needs changing: as soon as it is permanently illuminated, the dust bag has reached its capacity. Changing the dust bag - Remove the hose from the unit by pressing the two buttons at the end of the hose. - Close the cover of the filter compartment by pressing down lightly until it is heard locking into place. changing the motor-protection filter The motor-protection filter is located at the rear of the filter compartment. Should the filter be visibly dirty, replacement is recommended at the same time as the dust bag is changed. - Lift out the motor-protection filter holder from the filter compartment. - Press the release button to open the exhaust-air filter compartment. - Close the cover of the filter compartment by pressing down lightly until it is heard locking into place. This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase. [. . . ] Swirl® and Y101® are registered trademarks of a company of the Melitta Group. Anslutning till vägguttaget Se till att nätspänningen i vägguttaget motsvarar den som är märkt på apparatens skylt. - Dra ut sladden till önskad längd (men högst till det röda märket) och sätt stickproppen i vägguttaget. Till att den är avstängd och att den inte är ansluten till vägguttaget. [. . . ]