User manual SEVERIN BR 7926

[. . . ] Should the 5 appliance, for instance, have been dropped onto a hard surface, it must no longer be used: even invisible damage may have adverse effects on the operational safety of the appliance. In the event of such damage being found, the appliance must no longer be used. Always switch off and remove the plug from the wall socket after use, and also - in case of any malfunction and, - during cleaning. Never use the vacuum cleaner to pick up - sharp or pointed objects such as glass splinters, - hot ashes, cigarette stubs or chemical matter, - stone dust, plaster, cement or any similar fine dust particles, - foam, water or other liquids. [. . . ] The vacuum cleaner may then be used again after the blockage has been removed. Operation - Put the vacuum cleaner in its horizontal operating position. when using the upholstery tool), the nozzle may be attached directly to the hose grip. - Pull out the power cord from its storage 6 - - - to the necessary length (but not beyond the red mark) and insert the plug into a suitable wall socket. In addition, the suction power can be decreased further by opening the secondary air-flow opening slide in the hose grip. Always start with a low setting when cleaning soft objects such as curtains. Always ensure that the power cord is not routed around or runs over corners or edges, and that it cannot be jammed in a door. During operation, the hose may be used to pull the unit along behind you. To prevent the power cord from being pulled with excessive force, always change to the next suitable wall socket when cleaning larger areas. Switch off the appliance after use and remove the plug from the wall socket. To retract the power cord automatically into its storage, press the foot switch of the retract mechanism. Accessories The dual-purpose tool is located in the accessories compartment. Multi-purpose tool The multi-purpose tool is especially suitable for cleaning large areas. Upholstery brush Fold out the brush element of the dualpurpose tool in the direction indicated by the arrow until it locks into place. This brush tool is suitable for cleaning uneven areas such as upholstered surfaces, picture frames, rows of books etc. Crevice tool The crevice tool is designed to clean difficultto-reach areas such as grooves, niches, corners and crevices. Changing dust bag or filters Before any filter is changed, always switch the appliance off and remove the plug from the wall socket. When replacing the motor or exhaust-air filter, it may be necessary to cut the filters to size with a pair of scissors. The indicator shows when the dust bag needs changing: as soon as it is permanently illuminated, the dust bag has reached its capacity. A noticeable decrease in vacuuming power also indicates that the dust bag has reached its capacity. Changing the dust bag - Remove the hose from the unit by pressing the two buttons at the end of the hose. - Remove the filter holder with the dust bag attached by lifting it out. [. . . ] Guarantee This product is guaranteed against defects in materials and workmanship for a period of two years from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. [. . . ]