User manual SEIKO SPC

[. . . ] 1/100 SECOND, RETROGRADE CHRONOGRAPH SEIKO SERIES SPC (7T82) FEATURES STOPWATCH 1/10-second hand STOPWATCH second hand STOPWATCH 1/100-second hand Minute hand 901 8 7 60 45 0 30 15 /100 SEC. 1/100 SEC. N Hour, Minute and Small Second Hand N Date Hour hand N 4 Chronograph hands: · 1/100-second, 1/10-second, second and minute hands. [. . . ] Turn the crown counter-clockwise until the previous day's date appears. Turn counter-clockwise to advance the hour and minute hands past 12:00 AM. Set the hour and minutes hands to the desired time taking AM or PM into consideration. Note: Do not set the date between 9:00 PM and 1:00 AM Otherwise, the date may not change properly. WATCH OPERATION 22 CHRONOGRAPH HAND POSITION ADJUSTMENT: If the Chronograph hands are not in the "0" (12 o'clock) position, follow the procedures below to set them to the the "0" (12 o'clock) position. - Chronograph 1/10-second and 1/100-second hands turn a full circle and can now be set to correct position. · Press button "B" repeatedly to set them to the "0" position. - Chronograph second hand turns a full circle and can now be set to correct position. · Press button "B" repeatedly to set it to the "0" position. - Chronograph minute hand turns a full circle and can now be set to correct position. · Press button "B" repeatedly to set it to the "0" position. [. . . ] Press button "B" to Split/Split Release/Reset. CHRONOGRAPH DEMONSTRATION: When the chronograph is reset, pressing button "B" for 2-3 seconds starts the demonstration of the chronograph hands. If either button "A" or "B" is pressed during a demonstration, the demonstration will be stopped and the chronograph will be reset. SPC001 P. [. . . ]