User manual SEIKO SAT1100

[. . . ] CHROMATIC TUNER SAT1100 INSTRUCTION MANUAL NAMES OF PARTS Note indicator LED LCD display Tuning meter Tuning guide LED Output jack Built-in Microphone Power button Mode button Sound button [LCD display] Pitch UP/DOWN button Input jack Backlight button Note UP/DOWN button Battery reserve indicator Backlight mode mark Mode indication Pitch indication BEFORE USING YOUR TUNER 1. [. . . ] * For battery replacement, see "BATTERY CHANGE" below. HOW TO USE TUNER When tuning electric or electronic instruments, or when using the contact microphone sold separately (STM20) for tuning, insert the plug of the instrument or microphone into Input jack. While a plug is connected with Input jack, the Built-in microphone is disabled. Auto mode (AUTO) When a note is played, Tuner automatically identifies it, and indicates the note closest to it on LCD display. It also indicates discrepancy between the input note and the note shown on display by Tuning meter and Tuning guide LED. Play a note on the instrument. * When tuning is made through the Built-in microphone, choose a quiet environment, and bring instrument close to Tuner. 4. Tune instrument so that the note you wish to tune to is indicated on LCD display. Tune instrument further until the pointer of Tuning meter indicates "0". * When discrepancy between the input note and the note indicated by the Note indicator LED is within the range of ±3 cents, both Tuning guide LEDs remain lit up. Manual mode (MANUAL) Set note you wish to tune to, and then, play a note. Tuner indicates discrepancy between the input note and the note you have set by Tuning meter and Tuning guide LED. [. . . ] Tune instrument until the pointer of Tuning meter indicates "0". * When discrepancy between the input note and the note indicated by note indicator LED is within range of ±3 cents, both Tuning guide LEDs remain lit up. [. . . ]