User manual SEIKO KINETIC

[. . . ] Weight : Alternating current magnetic field transmission (approximately 1 kHz) : 135 x 125 x 32 mm : 190 g 4. [. . . ] · After the time of operation you set is up, the charger shuts off automatically. If the START button is pressed while charging, the charger starts working again from the beginning. · To turn off the charger manually, pull the AC plug out of the receptacle. Case number PRECAUTIONS WARNING 1. Do not use SEIKO YT02A for any other purposes than charging SEIKO KINETIC watches. In case any failures or malfunctions are observed, immediately discontinue using the charger and pull out the AC plug. 5M 43-0A00 Crown Crown position 1M 9T 7L 5M 3M START Button DC jack (for connecting the AC adaptor plug) Timer Setting Switch ON 1M 9T 1M 9T 1M 9T 30min. TIMER 5M 3M 5J 4M 5M 43-0A 00 3 1 2 hrs. 4M 1M 9T 7L 5M 3M 7D 5J 4M Not set in the center The crown is not correctly set NOTICE ON CHARGING Watch Settting Position · The charger may make a subtle noise while charging. · The main body may heat up while charging, however, it does not affect the functions of the watch. · Be careful with the temperature of the watch, when handing the watch to the customer. BEFORE CHARGING 1. Do not tilt it or place it on an unsteady surface, as the watch cannot be set properly on such places. [. . . ] (The state that the watch can be worn under normal condition. ) ** The approximate charging time required for a watch which has already run down to be fully charged. 5M43- 0A 0 0 5M 43-0A 00 5M 43-0A 00 BUTTONS & OPERATIONS 7D 5J 4M 5M 3M 5J 5J 5M 3M 4M [. . . ]