User manual SEIKO H024

[. . . ] Você pode sentir-se orgulhoso de possuir um Relógio SEIKO Duo-Display Cal. Para obter os melhores resultados, leia atentamente as instruções contidas neste opúsculo antes de usar o seu Relógio SEIKO Duo-Display. Conserve este manual para consultas futuras. English ENGLISH CONTENTS Page FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BUTTONS & DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] * When Button C is pressed at the end of timing, the final split time is displayed for 10 seconds with the flashing split display indicator, and then the flashing stops. " Lap time" is the time that has Lap 1 elapsed from the start of one stage of an activity to that of the next stage. "Split time" is the time Start that has elapsed from the start of an activity to any given stage. Split No. 3: 1 min. , 55 sec. 14 C D D C FINAL SPLIT/ STOP D RESET The first 100 lap and split times are automatically stored in memory and can be recalled either during or after the stopwatch measurement. Even if the digits are reset to "00" in the stopwatch measurement, the stored data is not erased and can be recalled unless a new measurement is started. In order to recall lap and split times while timing an event, press Button A to cycle through the 5 different modes. The stopwatch mode indicator (CHR) will continue to flash to indicate that the STOPWATCH mode is in use. A Press to show the MEMORY RECALL mode. Lap 2 Split time A 15 English B Press to select the data (lap time/split time) to be recalled. With each press of Button B, the lap time and split time are displayed alternately. TIMER MODE (TMR) The timer can be set up to 23 hours and 59 minutes in minute increments. (See *8 on page 23) English A time-up warning beep sounds 3 seconds before the set time is up. When the set time is up, time-up beep sounds for 5 seconds. TIMER SETTING A B Press to show TIMER mode. C OR Press for 2 to 3 seconds to show TIMER SETTING display. * The minute digits start flashing. With each press, stored data are recalled from the newest to the oldest. Minute 16 A Press to exit from the MEMORY RECALL mode. D With each press, stored data are recalled from the oldest to the newest. (See *7 on page 23) C D B Press to select an item (flashing) to be adjusted. Press to adjust the selected item. (See *2 on page 22 and *8 on page 23) Press to return to TIMER mode. 17 Hour English TIMER OPERATION ALARM MODE (ALM) English C Two daily alarms work independently. The alarms can be engaged and disengaged independently of one another. A D Press to show ALARM mode. B D RESET PM indicator for 12-hour display only C Mode indicator C START C STOP C C STOP RESTART * Stop and restart of the timer can be repeated as many times as required by pressing Button C. * If Button D is pressed when the timer is stopped, the display returns to show the set timer time. * The timer will continue to count down even if you move to one of the other 5 modes by pressing Button A. *5 The hourly time signal will not ring while alarm is sounding. 22 *6 Remarks on stopwatch function: · The lap number counts up to "199". After "199", the number is displayed in two digits such as "00" for 200, "00" for 300, and so on. After "199", the number is displayed in two digits such as "00" for 200, "00" for 300, and so on. *7 Remarks on memory recall function: · In memory recall after measurement, the oldest measurement in memory is displayed. In memory recall during measurement, the newest measurement in memory is displayed. *8 Remarks on timer function: · The digits advance quickly if Button D is kept pressed. · Pressing button A while the digits are flashing can reset the timer to "0:00, " and the minute digits start flashing. · If the watch is left untouched in the TIMER SETTING display with an item flashing, it will automatically return to the TIMER mode in 2 to 3 minutes. [. . . ] Hour, minute, second, date and day of the week PM indicator in the 12-hour display STOPWATCH mode . . . . . . . . . . . . . . . . . . . . Hour , minute, second, 1/1000 seconds and lap/ split number MEMORY RECALL mode . . . . . . . . . . . Lap time / Split time (hour, minute, second and 1/ 1000 seconds) and lap/split number TIMER mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Countdown timer (hour and minute) ALARM mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]