User manual SEIKO DM70

[. . . ] DIGITAL METRONOME DM70 INSTRUCTION MANUAL NAME AND OPERATION OF PARTS Volume setting (for both metronome sound and reference note) 1. Press the selector button "VOLUME" will be shown on the display. [. . . ] Tempo Beat/rhythm Reference note Volume [120] [0] [A] [High] Press it to change the setting of the item selected by pressing the . Speaker It gives out the tempo sound of the metronome and the reference note. Earphone jack (monophonic type) Insert the ø2. 5 mm earphone plug into it to use the earphone. Battery hatch Open it when replacing the battery. BATTERY CHANGE When the battery nears its end, the tempo LED display and the liquid crystal display become dim, and the sound becomes weak. Set the new battery, checking that the (+) and (­) terminals are properly set. Close the battery hatch tighten the screw to fix it. HOW TO USE The battery included with the metronome is a monitor battery, and its life may be shorter than the specified period. 6. Press the power button repeatedly to turn on and off the metronome, and check if it operates properly. Press the selector button "TEMPO" will be shown on the display. With each press, the tempo is increased or decreased by one, respectively. The digits move quickly by 10 tempos if the button is kept pressed. * Be sure to set the (+) an (­) terminals of the battery properly. * When the battery is replaced with a new one, tempo, beat/rhythm, reference note and volume settings you have made are all erased. * When disposing of the old battery, observe the regulations of the authorities concerned. [. . . ] 200 hours ( if the metronome is continuously used with the tempo set at "120", beat/rhythm at "0", and volume at "High") 11. 45 g (including battery) * The design and specifications are subject to change without prior notice for product improvement. [. . . ]