User manual SEGA VIRTUA COP 2DX SCHEM

[. . . ] Be sure to keep this manual nearby the product or elsewhere convenient for referring to it when necessary. Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially hazardous degrees, the terms of WARNING, CAUTION, etc. Be sure to understand the contents of the displays before reading the text. [. . . ] If error messages are displayed when exiting TEST MODE, you should power the unit off and on again. In the manual for this product, "Media Board" and "DIMM" are one and the same. If settings other than those specified are used, inappropriate operations or malfunction may occur. SYSTEM TEST MENU MODE System Test Mode can be used to check that the main circuit operations are correct, adjust Monitor color, and perform coin/credit settings. However, this product can only be used with the settings shown below. SOUND TEST - OUTPUT TYPE: STEREO COIN ASSIGNMENTS - COIN CHUTE TYPE: COMMON - SERVICE TYPE: COMMON Press the TEST Button after powering on the unit to display the following SYSTEM MENU. SYSTEM MENU MEDIA BOARD TEST SYSTEM INFORMATION JVS TEST SOUND TEST C. R. T. TEST COIN ASSIGNMENTS CLOCK SETTING NETWORK SETTING(CORE) NETWORK SETTING(MEDIA) ENTER GAME TEST [*******************] EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON Press the SERVICE Button to move the cursor to the desired test item. Move the cursor to the desired item and press the TEST Button to display each test screen. Move the cursor to ENTER GAME TEST and press the TEST Button to enter the individual test menus for each game. Refer to "9-3 GAME TEST MODE". When testing is complete, move the cursor to EXIT and press the TEST Button. The game advertisement screen should be displayed. 51 www. seuservice. com MEDIA BOARD TEST STOP IMPORTANT! Powering off the system during the MEDIA BOARD TEST with a DIMM BOARD will erase the game programme data. Always wait for the test to complete before attempting to exit. MEDIA BOARD TEST is used to check the memory and IC on the MEDIA BOARD connected to the Chihiro. Test screens and test times may differ depending on the type of MEDIA BOARD connected to the unit. SIZE CHECK Screen C. R. T. TEST2/2 PRESSTESTBUTTONTOEXIT Adjust the CHECK GRID so that the entire GRID is displayed on the screen. Press the TEST Button to return to the SYSTEM MENU screen. 57 www. seuservice. com COIN ASSIGNMENTS Use COIN ASSIGNMENTS to set the credit rate for each coin inserted. Press the TEST Button to change the setting or to open the detailed settings. Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen. COINASSIGNMENTS COINCHUTETYPECOMMON SERVICETYPECOMMON COINCHUTE#1COINTOCREDITRATE 1COIN(S)COUNTAS1CREDIT(S) COINCHUTE#2COINTOCREDITRATE 1COIN(S)COUNTAS1CREDIT(S) DETAILSETTING GAMECOSTSETTING EXIT SELECTWITHSERVICEBUTTON ANDPRESSTESTBUTTON (A) (B) (C) (C) (D) (H) COINASSIGNMENTS COINCHUTETYPEINDIVIDUAL SERVICETYPEINDIVIDUAL COINCHUTE#1COINTOCREDITRATE 1COIN(S)COUNTAS1CREDIT(S) DETAILSETTING GAMECOSTSETTING EXIT SELECTWITHSERVICEBUTTON ANDPRESSTESTBUTTON COIN CHUTE TYPE. . . COMMON COIN CHUTE TYPE. . . INDIVIDUAL (A) COIN CHUTE TYPE(COMMON, INDIVIDUAL) Adjust settings according to the specs of the cabinet COIN CHUTE. COMMON This is for cabinets where a single COIN CHUTE is used by multiple players. The (C) COIN TO CREDIT RATE setting for COIN CHUTE #1 and #2 may be set differently. INDIVIDUAL This is for cabinets with individual COIN CHUTES for each player. Coins inserted by each player are treated as individual player credits. The (C) COIN TO CREDIT RATE setting is used by all COIN CHUTES. (B) SERVICE TYPE(COMMON, INDIVIDUAL) Use this to set the function of each SERVICE Button when there is more than one SERVICE Button. COMMON Pressing any SERVICE Button enters service credits for all players. INDIVIDUAL Pressing the SERVICE Button enters service credits only for the corresponding player. www. seuservice. com 58 (C) COIN TO CREDIT RATE Set the CREDIT RATE for each coin inserted. [. . . ] VCT-1102 SPY-1103 SPY-1104 SPY-1105 VCT-1104 105-5106 105-5107 105-5188 DP-1167 105-5170 ARC-1006 117-5233 421-7501-02 VCT-1103 SPY-1106 HOD-1307 HOD-1308 HOD-1309 HOD-1310 310-5029-F20 220-5482-91-03 220-5237-92-04 220-5482-91-04 220-5237-92-05 220-5237-92-06 220-5237-92-37 220-5482-91-08 220-5237-92-09 220-5237-92-08 601-5699X 601-8291 220-5575 220-5574 280-5009-01 280-5275-SR10 011-P00312 000-T00430-0B 000-P00406-W 000-P00410-W 050-H01600 030-000640-SB 030-000630-SB 011-F00310 060-F00600 030-000830-SB 060-F00800-0B 030-000850-SB 000-P00408 060-S00400 060-F00400 000-P00416-W DESCRIPTION CONTROLLER CABINET JOINT NUT PLATE PLATE 8-70 JOINT PART LID CONN PNL BRKT CASH BOX COVER CHUTE HOLE COVER TNG LKG LOCK BRACKET S LEG BRACKET PLATE LEG BRACKET BLACK STICKER 6. 3V 0. 15A HOLDER HOLDER BRKT SIDE BRKT L SIDE BRKT R UNDER BRKT UNDER PLATE SUMITUBE F F 20MM ASSY C. C 2DR TAIWAN NT$10 S ASSY C. C 2DR TAIWAN NT$10 ASSY C. C 2DR HONG KONG $1 S ASSY C. C 2DR HONG KONG $1 ASSY C. C 2DR MALAYSIA 50CENT ASSY C. C 2DR SINGAPORE $1 ASSY C. C 2DR KOREA 100W S ASSY C. C 2DR KOREA 100W ASSY C. C 2DR AUSTRALIA $1 LEG ADJUSTER BOLT M16×75 CASTER 75 CAM LOCK MASTER W/O KEY CAM LOCK W/KEYS CORD CLAMP 21 CORD CLAMP SR10 TAP SCR PH 3×12 M SCR TH BLK M4×30 M SCR PH W/FS M4×6 M SCR PH W/FS M4×10 HEX NUT M16 HEX BLT W/S BLK M6×40 HEX BLT BLK W/S M6×30 TAP SCR FH 3×10 FLT WSHR M6 HEX BLT W/S BLK M8×30 FLT WSHR BLK M8 HEX BLT W/S BLK M8×50 M SCR PH M4×8 SPR WSHR M4 FLT WSHR M4 M SCR PH W/FS M4×16 <Taiwan> <Taiwan> <Hong Kong> <Hong Kong> <Malaysia> <Singapore> <Korea> <Korea> <Australia> NOTE D-2/3 103 104 105 106 107 108 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 133 www. seuservice. com 14 ASSY SUB-CABI CONTROLLER (VCT-1101) ITEM NO. 600-6455-02 SPY-60014 SPY-60015 SPY-60016X SPY-60022 600-6972-0280 600-6972-0120 600-6972-0480 VCT-60010 DESCRIPTION WIRE HARN C. C DOOR SINGLE WH TOWER EXT 2 WH START EXT 2 WH RECIEVER EXT 2 WH EARTH CTRL CABI WIRE HARN EARTH ID5 0280MM WIRE HARN EARTH ID5 0120MM WIRE HARN EARTH ID5 0480MM WH FRONT LED EXT 2 NOTE D-3/3 www. seuservice. com 134 15 ASSY CTRL PANEL DX (VCT-2000) 135 NOTE: Do not wire across the slash mark portions. www. seuservice. com NOTE: ACTUAL CONTROL PANEL WILL DIFFER FROM WHAT IS SHOWN HERE. D-1/2 15 ASSY CTRL PANEL DX (VCT-2000) ITEM NO. VCT-2001-01 999-1774 509-5712-01S 280-5009-01 280-5275-SR10 HOD-60020 DESCRIPTION CTRL PNL ENG VAC FORM CONTROL PANEL SW PB W/L 6V YELLOW CORD CLAMP 21 CORD CLAMP SR10 WIRE HARN CONTROL PANEL NOTE D-2/2 www. seuservice. com 136 16 CONTROL UNIT EXP (VCT-2100-01) D-1/2 137 www. seuservice. com 16 CONTROL UNIT EXP (VCT-2100-01) ITEM NO. VCT-2101-01 VCT-2102-01 VCT-2103-01 VCT-2104 VCT-2105 VCT-2106 VCT-2107 JPT-2030 125-5124 280-5124-04 310-5029-D20 509-5080 601-0460 000-P00308-W FAS-000099 FAS-000101 VCT-60011 VCT-60012 DESCRIPTION COVER L EXP COVER R EXP HAMMER EXP TRIGGER CHANGE BUTTON SW BRKT COM SPRING SENSOR UNIT TORSION SPRING NYLON CLAMP NK04 SUMITUBE F D 20MM SW MICRO TYPE (SS-5GL2) PLASTIC TIE BELT 100 MM M SCR PH W/FS M3×8 M SCR PH W/SMALL FS BLK M3×10 M SCR PH W/FS M2. 3×10 WH CONTROL UNIT WH CHANGE SW NOTE D-2/2 www. seuservice. com 138 17 SENSOR UNIT (JPT-2030) ITEM NO. [. . . ]