User manual SEGA QUAKE III BROADBAND

[. . . ] Playing Quake III Arena for SEGA Dreamcast with your Broadband Adapter Quake III Arena for SEGA Dreamcast supports the Dreamcast Broadband Adapter. [. . . ] 3) When the Command Prompt window appears, type "ipconfig /all" at the command line. Make sure you type the Forward Slash `/' instead of the Backslash character `\'. Your network's Subnet Mask and Gateway information will appear (Windows 2000 users will see additional network information). Some Static IP network configurations will allow you to disconnect your PC so that you can use the same IP address for your Dreamcast. Dynamically Allocated IP Address (Using DHCP) To connect to an ISP that uses DHCP, follow these steps: 1) Select the Internet Game option from the Mode Select Screen. 3) Make sure the IP Address, Gateway, Primary DNS, and Secondary DNS are all marked with "0. 0. 0. 0". If you have trouble finding available game servers online, we recommend that you press the X Button to rescan for servers, wait until the "No Response from Master Server" message appears, and then try again. Peer-to-Peer Protocol over Ethernet (PPPOE) To connect to an ISP that uses PPPOE, follow these steps: 1) 2) 3) 4) Select the Internet Game option from the Mode Select Screen. Make sure the IP Address, Gateway, Primary DNS, and Secondary DNS are all marked with "0. 0. 0. 0". 5) Select "Next" to connect online. Additional Network Information from your PC 1) Right mouse click on the Network Neighborhood icon on your Desktop and select Properties. [. . . ] Select "Next" to connect online. Additional Games that support the Dreamcast Broadband Adapter To get more information about other SEGA Dreamcast games that support the Dreamcast Broadband Adapter, please go to: http://www. sega. com/broadband. htm 670-14317A [. . . ]