User manual SEGA MINIRIDER2

[. . . ] Instead, it is the user's responsibility to dispose of their waste equipment by arranging to return it to a designated UK collection point for the correct recycling of waste electrical and electronic equipment. For more information about where you can send your waste equipment for recycling contact your local authority office. Battery Recycling Statement The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimize the impact of batteries on the environment and encourage the recovery of the materials they contain. To achieve increased collection and recycling of waste batteries, the Directive places 'producer responsibility' obligations on manufacturers and importers of portable, industrial and automotive batteries. The following symbol will be on all equipment fitted with batteries from 26th September 2008 and indicates they must NOT be disposed of with other normal waste. Instead, it is the user's responsibility to dispose of used batteries by arranging to return them to a designated collection point for the correct recycling of waste batteries. For more information about where you can send your waste batteries for recycling contact your local authority office. -2- -3- -4- TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1. [. . . ] 01 GAME ASSIGNMENTS ÿÿ DIFFICULTY ADVERTISE SOUND ADVERTISE VIBRATION SPEEDOMETER CABINET MOTION TOTAL MACHINE LINK ID VS MODE 1ST CONTINUE SYSTEM LANGUAGE EXIT NORMAL ON ON KM/H ON 1 1 OFF ENGLISH SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON - 47 - 2. Each item is explained below. DIFFICULTY Set level of difficulty to one of 5 levels by time extension. (Default setting: NORMAL) NOTE: Can only be set on cabinet with LINK ID "1, " and other communicating cabinets also set accordingly. When this setting is set to "ON, " the seat will move on the title logo during the advertising screen and at times during demo play. (Default: ON) NOTE: When CABINET MOTION is set to "OFF, " this setting cannot be enabled. Set the speedometer to display speed in kilometers per hour (KM/H) or miles per hour (MPH). (Default setting: MPH <USA>, KM/H <Others>) Set seat movement during the game. Set a number 1, 2, 3 or 4 depending on the total number of units connected. (Default setting: 1) Set the cabinet to 1 if it is not for Versus Mode. Set the LINK ID numbers so that all communicating cabinets have different numbers. When positioning cabinets, ensure that you arrange them so that the LINK ID numbers increase from left to right. Ensure that persons other than the conductor of the test do not inadvertently approach the seat while the test is in progress. Test the motion of the seat. Use this screen to periodically check the condition of the sensor, volume, and seat motor. Changes to the settings do not become effective until EXIT has been selected on the GAME TEST MODE screen. After a setting has been changed, be sure to always exit the GAME TEST MODE. Also, always perform the seat motor initialization operation before checking the seat motor. 1. On the GAME TEST MODE screen, select SEAT MOTION TEST and press the TEST Button. 01 SEAT MOTION TEST INITIALIZE UP DOWN MOVE TO NEUTRAL ÿ ÿ EXIT UP LIMIT SENSOR DOWN LIMIT SENSOR SEAT SLANT COMPLETED OFF OFF OFF OFF OFF **h SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON 2. Each item is explained below. INITIALIZE Performs initialization operation for seat motor. When selected, "INITIALIZING" is displayed and the seat moves automatically. Do not touch the seat until "COMPLETED" is displayed and the seat has completely stopped moving. If "INCOMPLETE" is displayed, test the seat motor operation after performing initialization. [. . . ] 1 2 101 102 103 301 PartsNo HMM- 1351 HMM- 1352 509- 5838- Y 509- 5495- 04- 91 280- 5275- SR10 HMM- 60036 PartsNo TÁ T START SW PLATE STICKER START AND VIEW SW PB LW 15Y- TK1670 1LPUSH BUTTON RED CORD CLAMP SR10 W SIGNAL START AND VIEW SW H - 102 - ASSY MOTION STOP SW ITEM NO. 1 101 301 PartsNo HMM- 1371 509- 6109- 91 HMM- 60037 PartsNo TÁ T BUTTON BRKT SW PB ABN2F10R ROHS W SIGNAL MOTION STOP SW H - 103 - ASSY CASH DOOR ITEM NO. 1 2 3 101 201 202 PartsNo HMM- 1401 HOT- 1203X ABX- 1262 220- 5794 060- F00400- 0B 065- E00300 PartsNo TÁ T CASH BOX DOOR CENTER TNG SIDE TNG CLY LOCK W KEYS / FLT W SHR BLK M4 E RING 3MM - 104 - SW UNIT ITEM NO. 1 2 101 201 PartsNo HMM- 1451 421- 12043- 01 838- 14548- 01 000- P00308- W PartsNo TÁ T SW BRKT STICKER SW PANEL CE SW & C VOL BD M SCR PH W FS M3X8 / - 105 - ACCEL UNIT ITEM NO. [. . . ]