User manual SEGA LOST WORLD UR

[. . . ] 4201-6325-01 Warranty Your new SEGA product is covered for a period of 90 Days from the date of shipment. [. . . ] This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. Sellers sole liability in thew event a warranted part described above fails shall be, at it's option, to replace or repair the defective part during the warranty period. Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void. Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages. ALL NEEDED WIRING CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE THE GAME FOR THIS APPLICATION. THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING VALIDATORS: HOLE POSITION#1 (FORWARD-MOST POSITION) HOLE POSITION#2 Mars 2000 series Mars 2000 series DBV45 (JCM) CURRENTLY NOT USED DSI01* HOLE POSITION #3 HOLE POSITION #4 *The back flange on the chute can be removed for hold position #4. If the flange is not removed, it may interfere with the back of the cabinent. The frame and cashbox enclosure on this coindoor has been modified to accomodate a Mars 2000 series upstacker. A 2000 series stacker can be added by simply removing the top two entry door and replacing it with a one entry door with a cut-out for a stacker. [. . . ] This one entry door can be ordered through Coin Controls or one of Coin Controls autherized distributors. [. . . ]