User manual SEGA LET ME DANCE

[. . . ] (For your reference, see page 8, 9) 2) Go into Set Blue Screen and see composition works properly. (Ref. P29, 30) 3) See the CD, CD Case, Papers comes out properly. 2. Dimension 1) Size : 1630(W) X 850(D) X 2150(H) mm 64. 2(W) X 33. 5(D) X 84. 7(H) Inch 2) Weight : 250Kg / 552 lbs 2-2. Electricity 1) Power supply : AC110/230V, 50~60Hz 2) Electric power : 350Watt 3. [. . . ] Lights on at the sensor LED with no CD. < J6 : CD U/D Motor > Lift up a CD which music video recorded from the CD R/W and it makes the CD to dispatch thru B. < JP1 CD out Motor > CD R/W makes the CD from J6 to send CD exit thru B. B makes a proper CD with music video to move to an exit but a poor CD to send a bottom(C). 4-5. CD Case Dispenser CD CASE Dispenser perceives CD case left and it sends a CD case to exit piece by piece. < JP7 Case Motor > Case motor puts out a CD Case piece by piece concurrently a CD out. < JP13 Sensor1 > JP13 Sensor1 perceives whether CD Case remains. < JP3 Park Button, JP4 Setup Button, JP16 Coin Button, JP17 Reset Button > 4-6. Pin-Map < JP2 Bill > < JP5 Coin > < JP9 Print > < JP10 S/W IN > < JP11 DC Power > 5. PC & Accessories Set-Up Follow this instruction for program installation when you should format the PC or reinstall Window XP to the PC. a) Press right on a mouse to go inside to register in desktop. b) Click Customize Desktop after choosing Desktop in Display Properties. c) Unclick as below then pres OK 2) Set-Up Screen Saver a) Click Power after choosing Screen Saver in the tap of Display Properties. b) Select Power Schemes and choose "Never" as below. Then press OK. 3) Set Auto Updates a) Follow in order below then press System Start Settings Control Panel System b) Select "Automatic Update" and click "Turn off Automatic Updates" Then press OK. 4) Set "Service" at "Administrative tools". Start Settings Control Panel Administrative Tools Services b) Double click "Automatic Updates" c) Change "Automatic" into "Disabled" in Startup type and press Stop. And then press Apply. < Before > d) Double click "Security Center" < After > e) Change "Automatic" into "Disabled" in Startup type and press Stop. And then press Apply. < Before > < After > 5-2. Program Drivers for LMD installation are stored in D-drive as backup. 1) Program of LMD installation a) Copy the LMD program in D: and paste it to C: below. b) Go into the LMD program folder. Make shortcut file and copy them at Window desktop and Start menu. 2) Set "ASPI" and CD-ROM ASPI is a program for CD R/W's program works properly. a) Double click the folder " install_ program" at D: then double click "cd-rom" folder in order. b) Double click "aspi" folder to go into then execute `inst' file to double click. c) Execute `aspi' file to double click in `cd-rom' folder. And press OK. d) Set `CD-ROM auto start' as below. e) Set in order as below and press Apply, OK. < Before > 3) YMPEG program installation a) Double click install_ program < After > YMPEG_sample in order at D: to go in. And double click YMPEGSetup file to execute. b) Click Next> C) Click Install d) Click Finish 4) Installation of YMPEG program Serial Key a) When PC is formatted or LMD program launched first after Window XP installed, `YMPEG program Serial Key' asked in the screen. Press Window key in the keyboard then you see below. b) Press in order : Start Documents My Documents c) Press: D: install_ program YMPEG_sample and double click Serial to execute. d) copy the ID as : Tae-Hyeong Kim gapacci@chol. com ments e) Paste the ID (Tae-Hyeong Kim gapacci@chol. com ) to ID blank (Use shortcut Ctrl+V in the keyboard). d) Copy Serial # : 000016-M9N7AC-FCDRRU-47Y98V-8MF98H-KQ7DM3-MPRET5-5VPER2-DV24UP-R68PXJ e) Paste the Serial# to Serial blank. (Use shortcut Ctrl+V in the keyboard). f) Press OK then done. 4) CODEC installation CODEC is a program to play a motion picture. a) Double click install_ program `Ucp8_5030_x86_kr'file to execute. And double click b) Click c) Click Install d) Installation is done by Yes clicked. 5) Installation Dongle program Dongle program is a S/W lock program. a) Double click to go in install_ program codec in order and Double click `Hdd32' file in D: to execute. b) Click Next c) Click Next d) Click Finish. 5-3. [. . . ] (5) Printer More Wait Time : Set time to maintain message screen which shows same CD again to print out at the last stage of the play. (6) Auto Capture Time : Set time to take a picture by a camera. ( 10sec basically). ( NTSC: USA, Canada / PAL:Europe ) a) Cause : Error message occurs when there is no CD or no CD Case on the screen. Then counted 1. ) 2) Check Dispenser Check the dispenser within the LMD program. [. . . ]