User manual SEGA JUNGLE TREASURES

[. . . ] 2 www. seuservice. com Owner's Manual A Game of Skill SEGA AMUSEMENTS USA, INC. 999-1763 GAME CODE: JT VISIT OUR WEBSITE! BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. [. . . ] Non-compliance with the Electrical Specifications can cause a fire and electric shock. This product requires the Breaker and Earth Mechanisms as part of the location facilities. Using them in a manner not independent can cause a fire and electric shock. Ensure that the indoor wiring for the power supply is rated at 4 A or higher (AC single phase 100 ~ 120 V area). Non-compliance with the Electrical Specifications can cause a fire and electric shock. Be sure to independently use the power supply equipped with the Earth Leakage Breaker. Using a power supply without the Earth Leakage Breaker can cause an outbreak of fire when earth leakage occurs. Putting many loads on one electrical outlet can cause generation of heat and a fire resulting from overload. When using an extension cord, ensure that the cord is rated at 4 A or higher (AC 100 ~ 120 V area). Using a cord rated lower than the specified rating can cause a fire and electric shock. 3 www. seuservice. com Operation Area WARNING! For the operation of this machine, secure a minimum area of 24. 75 in. In order to prevent injury resulting from the falling down accident during game play, be sure to secure the minimum area for operation. Be sure to provide sufficient space so as to allow this product's ventilation fan to function efficiently. To avoid machine malfunctioning and a fire, do not place any obstacles near the ventilation opening. SEGA shall not be held responsible for damage, compensation for damage to a third party, resulting from the failure to observe this instruction. STOP IMPORTANT! For transporting the machine into the location's building, the minimum necessary dimensions of the opening (of doors, etc. ) are 24. 75 in. OPERATION PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players. In order to avoid accidents, check the following before starting the operation: WARNING! To ensure maximum safety for the players and the customers, ensure that where the product is operated has sufficient lighting to allow any warnings to be read. Operation under insufficient lighting can cause bodily contact with each other, hitting accident, and or trouble between customers. It is suggested to ensure a space allowing the players who feel sick while playing the game to take a rest. If they are not, the Cabinet may move and cause an accident. Ensure that all of the Adjusters are in contact with the floor. 5 www. seuservice. com CAUTION! WARNING! Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage or falling down, resulting in injury due to fragments and falling down. Placing any heavy item on the product can cause a falling down accident or parts damage. To avoid electric shock, check to see if door & cover parts are damaged or omitted. To avoid electric shock, short circuit and or parts damage, do not put the following items on or in the periphery of the product. [. . . ] - Press Volume up or Volume Down buttons to initiate manual head motor movement test Press Volume up botton or Volume down button to move head up and down. Note: Optical sensor segments will light shen optical sensor is blocked. - Pressing test again enters the Body Left / Right Motor Test - Display will read "3" Body Motor will then move left to right and home until test button or either volume button is pressed - Press Volume up or Volume down buttons to initiate manual body motor movement test Press Volume up button to move body to its left. Note: optical sensor segments will light when optical sensor is blocked www. seuservice. com 16 13. [. . . ]