User manual SEGA GHOST SQUAD DELUXE TYPE

[. . . ] 1ST PRINTING NOVEMBER `04 www. sauservice. com ® Owner's Manual Deluxe Version SEGA AMUSEMENTS USA, INC. 4201-6831-01 GAME CODE: CTF BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. [. . . ] Move the cursor to the desired item and press the TEST Button to display each test screen. Move the cursor to ENTER GAME TEST and press the TEST Button to enter the individual test menus for each game. When testing is complete, move the cursor to EXIT and press the TEST Button. The game advertisement screen should be displayed. 65 www. sauservice. com B. MEDIA BOARD TEST STOP IMPORTANT! Powering off the system during the MEDIA BOARD TEST with a DIMM BOARD will erase the game programme data. Always wait for the test to complete before attempting to exit. MEDIA BOARD TEST is used to check the memory and IC on the MEDIA BOARD connected to the Chihiro. Test screens and test times may differ depending on the type of MEDIA BOARD connected to the unit. 1- The following is the MEDIA BOARD TEST screen for a unit with a DIMM BOARD. MEDIA BOARD TEST DIMM BOARD(TYPE3) VERSION **** STATUS GOOD CHECKING 100% DIMM TEST DIMM0 GOOD DIMM1 NONE GD-ROM GOOD PRESS TEST BUTTON TO EXIT 2- MEDIA BOARD TEST begins immediately upon entering this test mode. 3- If "GOOD" is displayed to the right of each item, the MEDIA BOARD components are functioning properly. 4- After the test is complete, move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen. www. sauservice. com 66 C. SYSTEM INFORMATION Use SYSTEM INFORMATION to check version and other information for system programmes. Screens may differ depending on the type of MEDIA BOARD connected to the unit. The following is the SYSTEM INFORMATION screen for a unit with a DIMM BOARD. SYSTEM INFORMATION MAIN BOARD REGION **** BOOT VERSION **** QC FIRM VERSION **** SC FIRM VERSION **** SERIAL NO. *************** MEDIA BOARD DIMM BOARD + GDROM MEMORY SIZE 512MB FIRM VERSION **** SERIAL NO. *************** PRESS TEST BUTTON TO EXIT (A) (B) (B) (B) (C) (D) (E) (F) (G) Press the TEST Button to return to the SYSTEM MENU screen. BOOT VERSION, QC FIRM VERSION, SC FIRM VERSION Version information for the MAIN BOARD system programmes. Serial number of the DIMM BOARD. (E) (F) (G) 67 www. sauservice. com D. JVS TEST JVS TEST is used to verify the specs of the I/O BOARD connected to the Chihiro and to run input tests. Screens may differ depending on the type of I/O BOARD connected to the unit. JVS TEST INPUT TEST NEXT NODE EXIT NODE **** NAME **************** I/O BD JVS Ver**** ********* CMD VER 1. 1 JVS VER 2. 0 COM VER 1. 0 SWITCH 2 PLAYER(S) 13 BITS COIN 2 SLOT ANALOG 8 CH ROTARY 0 CH KEYCODE 0 SCREEN X:0 Y:0 CH:0 CARD 0 SLOT HOPPER OUT 0 CH DRIVER OUT 6 CH ANALOG OUT 0 CH CHARACTER CHARA:0 LINE:0 BACKUP 0 SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON Use the SERVICE Button to move the cursor to the desired test item. Move the cursor to INPUT TEST and press the TEST Button to enter the INPUT TEST screen for the I/O BOARD currently displayed. When 2 or more I/O BOARDS are connected, move the cursor to NEXT NODE and press the TEST Button to enter the test screen for the next I/O BOARD. The lower the NODE number, the further away the node is from the Chihiro. [. . . ] CTF-1340 CTF-1301 CTF-1302 CTF-1303 CTF-1002 FAS-290037 FAS-120031 DESCRIPTION ASSY HOLDER LIGHT CONTROLLER HOLDER L CONTROLLER HOLDER PLATE L CONTROLLER HOOK WASHER CTF HEX SKT LH CAP SCR SCR STN M5X20 TAP SCR P-TITE TH BLK 4X16 NOTE www. sauservice. com 170 ASSY CONTROLLER HOLDER (CTF-1320) Fastening Torque: 201 : 1. 4N·m(14kgf·cm) ITEM NO. CTF-1340 CTF-1321 CTF-1322 CTF-1303 CTF-1002 FAS-290037 FAS-120031 DESCRIPTION ASSY HOLDER LIGHT CONTROLLER HOLDER R CONTROLLER HOLDER PLATE R CONTROLLER HOOK WASHER CTF HEX SKT LH CAP SCR SCR STN M5X20 TAP SCR P-TITE TH BLK 4X16 NOTE 171 www. sauservice. com ASSY HOLDER LIGHT (CTF-1340) (D-1/2) www. sauservice. com 172 ASSY HOLDER LIGHT (CTF-1340) ITEM NO. CTF-1341 CTF-1342 CTF-1343 838-14463 280-5247 280-5248-5. 7 280-5275-SR10 050-U00300 060-F00300 000-P00316-W CTF-60027 DESCRIPTION HOLDER LIGHT COVER HOLDER LIGHT PLATE LED BD BRKT LED BAR BD GREEN ONE TOUCH BUSHING ONE TOUCH COLLAR M3 L=5. 7 CORD CLAMP SR10 U NUT M3 FLT WSHR M3 M SCR PH W/FS M3X16 WH HOLDER LED NOTE (D-2/2) 173 www. sauservice. com ASSY CONTROL PANEL (CTF-2000) ITEM NO. CTF-2001 CTF-2002X CTF-2003 CTF-2004X CTF-2005 CTF-2006-01 509-6069 280-5009-01 050-F00400 068-441616 000-T00408-0B 000-F00408 CTF-60031 DESCRIPTION CONTROL PANEL BASE CARD ENTRY PLATE ENTRY PLATE SASH LOCK BRKT CUSHION SPONGE CONT PNL STICKER CONTROL PANEL ENG SW PB OBSA-45UM-G-1FLED-G-5V CORD CLAMP 21 FLG NUT M4 FLT WSHR 4. 4-16X1. 6 M SCR TH BLK M4X8 M SCR FH M4X8 WH START SW NOTE www. sauservice. com 174 CONTROL UNIT (CTF-2100) (D-1/2) 175 www. sauservice. com CONTROL UNIT (CTF-2100) ITEM NO. [. . . ]