User manual SEGA DREAMCAST HARDWARE DREAMCAST MICROPHONE

[. . . ] ¡ Push the Microphone all of the way into the Dreamcast controller expansion socket. q Is there a good connection between the Microphone body and the Microphone stand? [. . . ] Placing the foam microphone cover in your mouth is extremely dangerous and can cause choking or suffocation. CAUTION Failure to comply with these cautions may result in personal injury or property damage from electric shock or other accidents. q Never attempt to disassemble or modify the Microphone. q Grasp Microphone body firmly when unplugging/plugging the Microphone from/ into the Dreamcast controller. Never pull/push on the Microphone stand or the Microphone stand connector. q Do not insert metallic objects, etc. , into Microphone body or the Microphone stand connector. Doing so could cause a short circuit. Usage Precautions Follow the precautions shown below when using the Microphone. Failure to follow these precautions may result in damage to or malfunction of the Microphone. q Do not subject the Microphone to strong impacts. q Do not apply strong force to or bend the Microphone stand in any way. q Use only the microphone (Microphone stand) provided with this Microphone. q Do not swing or twirl the Dreamcast controller when peripherals like the Microphone are connected. Do not leave the Dreamcast controller unattended when the Microphone is connected. Remove the Microphone from the expansion socket on the Dreamcast controller, 3. q Do not use or store the Microphone in an area that is very hot, cold, smoky, dusty, humid, or in an area where there is water, such as near a sink or a tub. [. . . ] Grasping the Microphone stand when removing the Microphone from the Dreamcast controller could damage the Microphone. Notes Connecting the Microphone 1 First, connect the Microphone stand to the Microphone body. 2 Insert the assembled Microphone into either Expansion Socket 1 or Expansion Socket 2 on the Dreamcast controller. Microphone stand Microphone body Push the Microphone all the way into the expansion socket. * Some software may require the Microphone be connected to a specific expansion socket. Please refer to the instruction manual provided with the software for details. Removing the Microphone 1 Pull the Microphone out of the Dreamcast controller by grasping the Microphone body. 2 Remove the Microphone stand from the Microphone body. About the Microphone Grasp the connecting plug on the Microphone stand and then pull it out. q Use only the microphone provided with this Microphone. [. . . ]