User manual SEGA CRAZY TAXI HIGH ROLLER STANDARD TYPE

[. . . ] www. seuservice. com 1ST PRINTING MARCH `03 CTH Standard Version Owner's Manual SEGA AMUSEMENTS USA, INC. 999-1711 VISIT OUR WEBSITE! BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. [. . . ] Removing the Coin Meter circuitry renders the game inoperable. SWITCH UNIT Open the coin chute door, and the switch unit shown will appear. 1 a SWITCH UNIT * Note: Actual Switch Unit will appear different. SOUND VOLUME SWITCH: Adjusts sound volume for all of the machines' Speakers. (SPEAKER) TEST BUTTON: (TEST) SERVICE BUTTON: (SERVICE) For the handling of the test button, refer to the following pages. Gives credits without registering on the coin meter. DEMAGNETIZER SWITCH: Eliminates the on-screen color unevenness due to magnetization of (DEMAG. ) CRT. First use this SW before performing the monitor's color adjustment. COIN METER Open the Cashbox Door by using the key to have the Coin Meter appear underneath the Cashbox. COIN METER FIG. 1 b 31 www. seuservice. com 10-2 SYSTEM TEST MODE STOP IMPORTANT! Any settings that are changed by users during TEST MODE are saved upon exiting TEST MODE with the EXIT command in the SYSTEM MENU. If the unit is powered off prior to exiting, changes to settings will not take effect. You may not enter GAME TEST MODE while the unit is reading from or checking the GD-ROM. If error messages are displayed when exiting TEST MODE, you should power the unit off and on again. In the manual for this product, "Media Board" and "DIMM" are one and the same. If settings other than those specified are used, inappropriate operations or malfunction may occur. A. SYSTEM TEST MENU MODE System Test Mode can be used to check that the main circuit operations are correct, adjust Monitor color, and perform coin/credit settings. However, this product can only be used with the settings shown below. SOUND TEST - OUTPUT TYPE: STEREO COIN ASSIGNMENTS - COIN CHUTE TYPE: COMMON - SERVICE TYPE: COMMON NETWORK SETTING (MEDIA) - NETWORK TYPE: NONE Press the TEST Button after powering on the unit to display the following SYSTEM MENU. SYSTEM MENU MEDIA BOARD TEST SYSTEM INFORMATION JVS TEST SOUND TEST C. R. T. TEST COIN ASSIGNMENTS CLOCK SETTING NETWORK SETTING(CORE) NETWORK SETTING(MEDIA) ENTER GAME TEST [*******************] EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON Press the SERVICE Button to move the cursor to the desired test item. Move the cursor to the desired item and press the TEST Button to display each test screen. Move the cursor to ENTER GAME TEST and press the TEST Button to enter the individual test menus for each game. Refer to "10-3 GAME TEST MODE". When testing is complete, move the cursor to EXIT and press the TEST Button. The game advertisement screen should be displayed. www. seuservice. com 32 B. MEDIA BOARD TEST Powering off the system during the MEDIA BOARD TEST with a DIMM BOARD will erase the game programme data. Always wait for the test to complete before attempting to exit. MEDIA BOARD TEST is used to check the memory and IC on the MEDIA BOARD connected to the Chihiro. Test screens and test times may differ depending on the type of MEDIA BOARD connected to the unit. [. . . ] Replace the Microswitch (MICROSWITCH 509-5704). Broken Microswitch. 73 www. seuservice. com TABLE 17. 2 PROBLEM Unsatisfactory Accel and Brake operation. CAUSE Incorrect volume setting. Faulty connector connection. COUNTERMEASURES Adjust the volume value in the Test Mode. Check the connections for the Accel and Brake connectors and the connectors between the Accel, Brake and Cabinet. Check the connections for the connectors between the I/O Board, the Cabinet and the Control Panel and those inside the Control Panel. [. . . ]