User manual SEGA AIRLINE PILOTS

[. . . ] 1st PRINTING MAY 00 STD TYPE OWNER'S MANUAL SEGA ENTERPRISES, INC. 4200-6479-01 Warranty Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. [. . . ] TEST GAME ASSIGNMENTS VOLUME SETTING BOOKKEEP ING BACKUP DATA CLEAR -> EXIT SYSTEM TEST MODE MENU GAME TEST MODE MENU Press the TEST button to display the SYSTEM TEST MODE MENU. By pressing the SERVICE button, move the arrow (->) to select the GAME TEST MODE. By pressing the SERVICE button, move the arrow (->) to select the desired item. Select EXIT and press the TEST button to exit from the GAME TEST MODE and return to the SYSTEM TEST MODE MENU. Further, select EXIT and press the TEST button to finish SYSTEM TEST MODE and return to the normal mode. A. INPUT TEST Select INPUT TEST to have the screen shown below appear and to observe the status of each switch and the value of each V. R. In this mode, Periodically check the status of each switch and V. R. INPUT TEST LANDING GEAR SWITCH FLAP SWITCH VIEW CHANGE BUTTON START BUTTON SERVICE TEST CONTROL WHEEL (AILERON) CONTROL WHEEL (ELEVATOR) RUDDER PEDAL THRUST LEVER L THRUST LEVER R UP UP OFF OFF OFF OFF ABH ABH ABH ABH ABH By pressing each switch, if the display on the right-hand side of the name of each switch changes to ON from OFF, the SW and the wiring connections are satisfactory. To check CHUTE 1 & CHUTE 2 coin switches, open the COIN CHUTE DOOR and insert a coin(s) in the slot. Simultaneously pressing the TEST BUTTON and the SERVICE BUTTON returns to the test menu. PRESS TEST AND SERVICE BUTTON TO EXIT B. OUTPUT TEST Select OUTPUT TEST to cause the following screen to appear, and allows the status of each lamp to be checked. In this mode, periodically check the lamp status. OUTPUT TEST START BUTTON LAMP LANDING GEAR UP LAMP LANDING GEAR DOWN LAMP FLAP UP LAMP FLAP DOWN LAMP VIEW CHANGE BUTTON LAMP OFF OFF OFF OFF OFF OFF Select the item with the SERVICE button and press the TEST button to alternate the display to and from ON and OFF. When exiting from OUTPUT TEST with ON display, all of ON displays change to OFF. Bring the arrow to EXIT and press the TEST BUTTON to return to the menu mode. -> EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON C. SOUND TEST This test mode allows each sound used in the game to be checked. SOUND TEST No. 0 Press the SERVICE button to increase the number sequentially, emitting the next sound to be tested. Press the TEST button to return to the TEST MENU. SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT D. test causes the monitor to display the following and allows the 3 screens (displayed simultaneously) to adjust brightness balance. C. R. T. GAME ASSIGNMENTS Selecting the GAME ASSIGNMENTS in the MENU mode causes the present game settings to be displayed and allows game setting changes (game difficulty, etc. ) to be made. After setting changes, be sure to exit from the TEST mode; the settings are not renewed until the TEST mode is exited. SETTING CHANGE PROCEDURE 1 2 3 Press the SERVICE BUTTON to move the "->" to the desired item. To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON. GAME ASSIGNMENTS GAME DIFFICULTY (TRAINING) NORMAL GAME DIFFICULTY (FLIGHT) NORMAL -> EXIT GAME DIFFICULTY (TRAINING) Sets the game difficulty for the TRAINING Mode. Game difficulty can be set from among the 5 categories, i. e. , VERY EASY, MEDIUM EASY, NORMAL, MEDIUM HARD, and VERY HARD. [. . . ] DYN-2011 DYN-2012 DYN-2013 DYN-2014 APC-1511 601-7551 045-C02520 031-000510-OB 050-F00500 DESCRIPTION LOCK ROD A LOCK ROD B LOCK ARM ROD HOLDER BASE LID R LOCK HANDLE COT PIN 2. 5 X 20 CRG BLT BLK M5 X 10 FLG NUT M5 10 AC UNIT (APC-1530) ITEM NO. APC-1531 214-0202 509-5453-91-V-B DESCRIPTION AC BRKT AC INLET PANEL TYPE SW ROCKER J8 V-B 11 ASSY MAIN BD STD (APC-4500) ITEM NO. APC-4501 840-0005D-05 837-13551-92 400-5397 000-P00416-W 011-P00325 011-T03512 DESCRIPTION WOODEN MAIN BASE STD ASSY CASE NAO APC W/O JAL I/O CONTROL BD FOR JVS SW REGU FOR JVS M SCR PH W/FS M4 X 16 TAP SCR PH 3 X 25 TAP SCR TH 3. 5 X 12 12 ASSY PWR SPLY STD (APC-4600) ITEM NO. APC-4601 560-5426-H 838-11856CE-02 601-10369 000-P00416-W 011-P00325 011-T03512 DESCRIPTION WOODEN PWR SPLY BASE STD XFMR 100-120V 100V 5. 5A CONNECT BD W/FUSE 6. 3A CE STEREO PWR AMP 47 M SCR PH W/FS M4 X 16 TAP SCR PH 3 X 25 TAP SCR TH 3. 5 X 12 13 ASSY MONITOR COVER L (APC-1550) ITEM NO. [. . . ]