User manual SEGA AFTER BURN DLX

[. . . ] 420-6955-01 1ST PRINTING AFTER BURNER CLIMAX OWNER'S MANUAL 420-6955-01 OWNER'S MANUAL Nissay Aroma Building, 5-37-1, Kamata, Ohta-ku, Tokyo 144-8721, Japan Phone: +81-3-5480-6582 Facsimile: +81-3-5480-6584 © SEGA Produced under license from Boeing Management Company. Boeing, McDonnell Douglas, McDonnell, Douglas, North American Aviation, their distinctive airplane liveries, logos and product markings are among the trademarks owned by Boeing. F-14D Super Tomcat, F-5E Tiger II, A-10A Thunderbolt II, B-2A Spirit, and CVN-65 Enterprise are trademarks of Northrop Grumman Systems Corp. and are used under a license to Sega Corporation. IMPORTANT · Before using this product, read this manual carefully to understand the contents herein stated. [. . . ] 9-3a02 INPUT TEST Screen (CABINET TYPE: STANDARD) 0 The condition of each input device can be checked. The number of items displayed varies depending on the setting of CABINET TYPE. <Operation> 1 Manipulate the control stick or throttle lever and confirm that the input value on the right side of the item changes smoothly in response to manipulation. Manipulate the triggers and buttons and check the display on the right side of the item. The display is normal if it shows ON when trigger or button is pressed and OFF when trigger or button is released. Safety sensors are normal if they go ON when there is an obstacle between them and OFF when the obstacle is removed. When testing input devices involving seat motion, have two or more workers push the seat left/right. Confirm that the SEAT MOTION input value changes readily in response to seat motion. The limit sensor is normal if it goes ON when the seat has been fully inclined and OFF when the seat has been lowered. When the SERVICE Button and TEST Button are pressed simultaneously, the game test mode menu screen reappears. EXPLANATION OF TEST AND DATA DISPLAY <Menu Explanation> CONTROL STICK X: CONTROL STICK Y: THROTTLE LEVER: GUN TRIGGER: MISSILE TRIGGER: CLIMAX SWITCH: START BUTTON: SEAT MOTION: MOTION STOP: SEATBELT: SAFETY SENSOR LEFT: SAFETY SENSOR RIGHT: SAFETY SENSOR FRONT: SAFETY SENSOR REAR: LIMIT SENSOR LEFT: LIMIT SENSOR RIGHT: SERVICE: TEST: Control stick left/right input value Control stick up/down input value Throttle lever front/back input value Gun trigger Missile trigger ON when throttle lever is pressed to monitor side; OFF when lever is released START button Seat motion input value MOTION STOP button ON when seatbelt is fastened; OFF when seatbelt is unfastened Left side sensor Right side sensor Front sensor Rear sensor ON when seat is fully inclined to the left; OFF when seat is lowered ON when seat is fully inclined to the right; OFF when seat is lowered SERVICE Button TEST Button 1 FIG. 9-3a03 EXPLANATION OF TEST AND DATA DISPLAY b. OUTPUTTEST · When output test is selected and confirmed from the game test mode menu screen, seatinitializationtakesplaceonetimeautomatically. Becareful, asthe seatmovesleft/right. Accidentscouldarisefromcontactingorcollidingwiththe seat. Onceinitializationhascompleted, itwillnottakeplaceagainunlessgame testmodeisfirstexited. · Duringoutputtest, theseatbecomesunlockedandchecksbysensorsdonot takeplace. Makesurenooneisnearbyandexecutethetestwhileexercising due caution. During output test the seat inclines in response to manipulation even if the seatbelt is left unfastened and even if a safety sensor has been blocked. Therecouldbeaccidents. Someonemightfalldown, forinstance, or getafingerorhandcaughtinsomething. EXPLANATION OF TEST AND DATA DISPLAY FIG. 9-3b02 OUTPUT TEST Screen (CABINET TYPE: STANDARD) The condition of each output device can be checked. Periodically check the condition of each output device on this screen. Conditions are normal if each device operates and yields output as indicated below. The number of items displayed varies depending on the setting of CABINET TYPE. For safety, in performing tests in which the seat moves, manipulate the control stick and gun trigger without standing on the base. <Operation> EXPLANATION OF TEST AND DATA DISPLAY 1 Press the SERVICE Button and move the cursor to the item (output device) you want to test. While the TEST Button is depressed, the display on the right side of the item goes from OFF to ON and the selected output device operates. Press the SERVICE Button and move the cursor to EXIT. When the TEST Button is pressed, the game test mode menu screen reappears. <Menu Explanation> START BUTTON: CONTROL STICK VIBRATION: CABINET LAMP R: CABINET LAMP G: CABINET LAMP B: SPEAKER FL: SPEAKER FR: SPEAKER BL: SPEAKER BR: CABINET MOVING LOCK: CABINET MOVING LEFT: CABINET MOVING RIGHT: CABINET MOVING CENTER: EXIT: START button lights up at ON; extinguishes at OFF. GAME TEST MENU screen reappears. When AUDIO OUTPUT on the game setting screen is set to "2CH", speaker-related items change as follows. At "2CH", sound is output only from the left and right monitor speakers. SPEAKER FL: SPEAKER FR: Monitor left speaker produces sound at ON; no sound at OFF. Monitor right speaker produces sound at ON; no sound at OFF. EXPLANATION OF TEST AND DATA DISPLAY FIG. [. . . ] 1 2 3 4 5 6 7 8 9 10 11 101 102 103 104 201 202 203 204 301 PART NO. ABX-1404 ABX-1405 ABX-1406 ABX-1407 ABX-1408 ABX-1409 ABX-1410 ABX-1411 ABX-1412 ABX-1413 ABX-1414 610-0755 370-5297 350-5801 509-5975 000-P00408-SB 000-P00306-S 000-P00305 FAS-000157 ABX-60099 DESCRIPTION CONTROLLER GRIP L CONTROLLER GRIP R TRIGGER THUMB BUTTON SWITCH BRKT MOTOR BRKT TRIGGER SHAFT TRIGGER SPRING SENSOR DOG BUTTON GUIDE BUTTON SPRING ASSY ANALOG JOY W/O GRIP PHOTO INTERRUPTER GP1A75EJ000F MOTOR DC5V TG-01H SW MICRO TYPE SS-5GL M SCR PH W/S BLK M4x8 M SCR PH W/S M3x6 M SCR PH M3x5 M SCR PH M2. 3x3 WH ANALOG JOYSTICK ABX NOTE 1 0 ASSY BILLBOARD (ABX-100) (D-1/) 1 PARTS LIST 1 0 ASSY BILLBOARD (ABX-100) ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 21 22 101 102 103 104 105 201 202 203 204 205 209 210 211 301 302 PART NO. ABX-1501X ABX-1502 839-1267R ABX-1503 ABX-1504 ABX-1505X ABX-1514 ABX-1507 CTF-1002 ABX-1508X 253-5457 421-7501-15 440-WS0141-EG 440-WS0142-EG ABX-1509 ABX-1510X ABX-1511 ABX-1512X ABX-1513 ABX-1515 ABX-1516 280-5247 280-5248-10 390-6822-10EX 280-5008 280-5275-SR10 050-F00400 000-P00320-W 000-T00408-0B 030-000612-SB 060-F00600-0B FAS-290038 000-T00408-0C 000-P00430-W ABX-60047X ABX-60048 DESCRIPTION LED BOX LED HOLDER RGB LED 6 BAR BD LED PLATE LED PLATE HOLDER L BILLBOARD BOX CUSHION SPONGE SASH BILLBOARD ACRYL PLATE WASHER CTF ACRYL PLATE SASH FL HOLDER STICKER FL 10W STICKER W HIGH TEMP S ENG STICKER W POWER OFF S ENG BILLBOARD REFRECT SHEET BILLBOARD LID LED PLATE HOLDER R BILLBOARD SHEET LOWER BILLBOARD LID REFRECT SHEET CUSHION SPONGE LED PLATE CUSHION SPONGE 19 ONE TOUCH BUSHING ONE TOUCH COLLAR M3 L=10 ASSY FL10W EX W/CONN HIGH CORD CLAMP 15 CORD CLAMP SR10 FLG NUT M4 M SCR PH W/FS M3x20 M SCR TH BLK M4x8 HEX BLT W/S BLK M6x12 FLT WSHR BLK M6 HEX SKT LH CAP SCR STN M5x10 M SCR TH CRM M4x8 M SCR PH W/FS M4x30 WH TOP BILLBD01 WH TOP BILLBD02 NOTE (D-/) 1 PARTS LIST 1 00 Fastening Torque: M8 Molded parts 8. 3 N· m M8 Others 21. 6 N· m M10 For fastening seatbelt 43. 1 N· m PARTS LIST 1 1 ASSY SEAT BASE (ABX-100) (D-1/) 1 ASSY SEAT BASE (ABX-100) ITEM NO. [. . . ]