User manual SEGA AFTER BURNER CLIMAX

[. . . ] 420-6955-02 1ST PRINTING AFTER BURNER CLIMAX OWNER'S MANUAL 420-6955-02 Nissay Aroma Building, 5-37-1, Kamata, Ohta-ku, Tokyo 144-8721, Japan Phone: +81-3-5480-6582 Facsimile: +81-3-5480-6584 © SEGA Produced under license from Boeing Management Company. Boeing, McDonnell Douglas, McDonnell, Douglas, North American Aviation, their distinctive airplane liveries, logos and product markings are among the trademarks owned by Boeing. F-14D Super Tomcat, F-5E Tiger II, A-10A Thunderbolt II, B-2A Spirit, and CVN-65 Enterprise are trademarks of Northrop Grumman Systems Corp. and are used under a license to Sega Corporation. IMPORTANT · Before using this product, read this manual carefully to understand the contents herein stated. [. . . ] Periodically check the condition of each output device on this screen. Conditions are normal if each device operates and yields output as indicated below. The number of items displayed varies depending on the setting of CABINET TYPE. For safety, in performing tests in which the seat moves, manipulate the control stick and gun trigger without standing on the base. <Operation> EXPLANATION OF TEST AND DATA DISPLAY 1 Press the SERVICE Button and move the cursor to the item (output device) you want to test. While the TEST Button is depressed, the display on the right side of the item goes from OFF to ON and the selected output device operates. Press the SERVICE Button and move the cursor to EXIT. When the TEST Button is pressed, the game test mode menu screen reappears. <Menu Explanation> START BUTTON: CONTROL STICK VIBRATION: CABINET LAMP R: CABINET LAMP G: CABINET LAMP B: SPEAKER FL: SPEAKER FR: SPEAKER BL: SPEAKER BR: CABINET MOVING LOCK: CABINET MOVING LEFT: CABINET MOVING RIGHT: CABINET MOVING CENTER: EXIT: START button lights up at ON; extinguishes at OFF. GAME TEST MENU screen reappears. When AUDIO OUTPUT on the game setting screen is set to "2CH", speaker-related items change as follows. At "2CH", sound is output only from the left and right monitor speakers. SPEAKER FL: SPEAKER FR: Monitor left speaker produces sound at ON; no sound at OFF. Monitor right speaker produces sound at ON; no sound at OFF. EXPLANATION OF TEST AND DATA DISPLAY FIG. 9-3b03 c. GAMEASSIGNMENTS Whenthestoreiscrowdedinsideandmotionsmightbedangeroustocustomers passing near the product, set the cabinet so it will not move, then operate the product. EXPLANATION OF TEST AND DATA DISPLAY · Setting changes do not become effective until EXIT is selected on the setting screen. After a setting has been changed, be sure to always exit the setting screen. · UsethisproductwiththeCABINETTYPEsetatDELUXE. Otherwisetherecouldbe erroneousoperations. FIG. 9-3c02 GAME ASSIGNMENTS Screen (CABINET TYPE: STANDARD) The various game settings are established. The number of menu items differs depending on the CABINET TYPE setting in game assignments. <Operation> 1 Press the SERVICE Button, move the cursor to the item whose setting is to be changed and select the item. When the TEST Button is pressed, the preset value of the selected item changes. When AUDIO OUTPUT is set to "2CH", sound is output only from the monitor right and left speakers. Press the SERVICE Button and move the cursor to EXIT. EXPLANATION OF TEST AND DATA DISPLAY When the TEST Button is pressed, the game setting screen exits and the game test mode menu screen reappears. <Menu Explanation> DIFFICULTY: PLAYERS AIRCRAFT: CABINET TYPE: CABINET MOVEMENT: ADVERTISE SOUND: AUDIO OUTPUT: EXIT: Set the Game Difficulty (VERY EASY/EASY/NORMAL/HARD/VERY HARD). Return to the game test menu screen. CONTROL STICK VIBRATION: Turn control stick vibration ON/OFF. d. NETWORKSETTING EXPLANATION OF TEST AND DATA DISPLAY · Networkplaycannotbeimplementedwithoutpropersettingfornetworkplay. · Setting changes do not become effective until EXIT is selected on the setting screen. After a setting has been changed, be sure to always exit the setting screen. FIG. 9-3d02 NETWORK SETTING Screen (LINK NUM: 2) To setup network play with this product, connect two game machines with a network cable. The number of menu items differs depending on the LINK NUM setting. <Operation> 1 Press the SERVICE button, move the cursor to LINK NUM and select it. EXPLANATION OF TEST AND DATA DISPLAY When the TEST button is pressed, the value set for LINK NUM changes. [. . . ] ABX-1301 ABX-1302-01 ABX-1303-01 ABX-1304-01 ABX-1305 ABX-1306 DESCRIPTION MONITOR MASK STICKER INSTR UPPER ENG STICKER INSTR LOWER L ENG STICKER INSTR LOWER R ENG BEZEL SPONGE LONG BEZEL SPONGE SHORT NOTE 0 ASSY CONTROLLER BASE (ABX-100) PARTS LIST ITEM NO. ABX-1450 ABX-1401X 839-1187R ABX-1402 280-6695 ABX-1403 610-0756 280-5008 008-T00410-0C 050-F00300 050-F00400 FAS-290042 060-S00400-0C 050-F00500 ABX-60049X ABX-60050 DESCRIPTION ASSY SW PLATE CONTROLLER BASE AMP BD FOR ANALOG JOYSTICK CONTROLLER LID SPCL WSHR 4. 5-16x5 AL BLK CONTROLLER PLATE ASSY ANALOG JOY ABX CORD CLAMP 15 TMP PRF SCR TH CRM M4x10 FLG NUT M3 FLG NUT M4 HEX SKT LH CAP SCR STN M4x12 SPR WSHR CRM M4 FLG NUT M5 WH CTRL PNL01 WH CTRL PNL02 NOTE 0 0 ASSY SW PLATE (ABX-10) PARTS LIST ITEM NO. ABX-1451-01 509-6084-YY 509-6084-RLN DESCRIPTION SW PLATE EXP SW PB OBSA-30UM-Y-1F LED-Y-12V SW PB OBSA-30UM-R-1F LN NOTE 0 ASSY BILLBOARD (ABX-100) (D-1/) PARTS LIST 0 ASSY BILLBOARD (ABX-100) ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 21 22 101 102 103 104 105 201 202 203 204 205 209 210 211 301 302 / / PART NO. [. . . ]