User manual SEB BL522D31

[. . . ] Do not put more than 1 litre in the blender jar when you are processing hot liquids or recipes that create a great deal of foam. Never forget to place the sealing ring on the blade unit before assembling the blender jar, otherwise leakage will occur. Always make sure the lid is properly closed and the measuring cup has been inserted properly before you switch the appliance on. Allow the mill to cool down for at least 1 minute between the processing cycles. [. . . ] Never forget to place the sealing ring in the blade unit before you assemble the mill jar, otherwise leakage will occur. Never use the mill to grind very hard ingredients such as nutmeg, Chinese rock sugar and ice cubes. Always process cloves, star anise and aniseed together with other ingredients. If processed separately, these ingredients may attack the plastic materials of the appliance. The mill beaker may become discoloured when the mill is used to process ingredients such as cloves, anise and cinnamon The mill is not suitable for chopping raw meat. Do not put more than 50g of dried soy beans or 150g of fruit in the filter at the same time. Always make sure the lid is properly closed and the measuring cup has been inserted properly before you switch the appliance on. Soak dried ingredients, such as soy beans, before putting them in the filter. Thoroughly clean the parts which will come in contact with food before you use the appliance for the first time (see 'Cleaning'). Using the appliance Measuring cup (G) You can use the measuring cup to measure ingredients. Make sure that the grooves of the filter fit exactly onto the ribs inside the blender jar. Cut fruits into smaller pieces and soak dry ingredients, such as soy beans, before putting them in filter. 5 Switch the appliance off and remove the blender jar from the motor unit. 7 For optimal results, put the jar with the remaining ingredients back onto the appliance and let it run for a few more seconds. Note: when you are processing a large quantity, we advise you not to put all the ingredients in the filter at the same time. Start processing a small quantity and let the appliance run for a few seconds. Then switch the appliance off and add another small quantity, but do not exceed the top of the sieve mesh. Let the appliance cool down to room temperature before continue processing. Bring the soy milk to the boil, then add sugar and leave to simmer until all the sugar has melted. 11) 5 Hold the assembled mill upside down and screw it onto the motor unit (A) by turning it clockwise until you hear a 'click' (fig. [. . . ] 11) 5 Hold the assembled mill upside down and screw it onto the motor unit (A) by turning it clockwise until you hear a 'click' (fig. 7 Switch the appliance on and let it run until the ingredients are fine enough. 2 If the mill is still attached to the motor unit, remove the mill from the motor unit by turning it anticlockwise. 3 Place the mill upside down, unscrew the jar (anti-clockwise) and then remove the blade unit. [. . . ]