User manual SEAGATE MOMENTUS 7200.4 SATA REV C

[. . . ] Product Manual Momentus 7200. 4 SATA ST9500420AS ST9320423AS ST9250410AS ST9160412AS ST9120410AS ST980412AS ST9500420ASG ST9320423ASG ST9250410ASG ST9160412ASG ST9120410ASG ST980412ASG 100534376 Rev. C, November 2010 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Momentus and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners. [. . . ] C 13 2. 12 Electromagnetic immunity When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table: Table 6: Test Electrostatic discharge Radiated RF immunity Radio frequency environments Description Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV 80 to 1, 000 MHz, 3 V/m, 80% AM with 1 kHz sine 900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz ± 1 kV on AC mains, ± 0. 5 kV on external I/O ± 1 kV differential, ± 2 kV common, AC mains 150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz sine 1 A/m, 50Hz/60Hz, 3 axes 30% Reduction for 25 cycles >95% Reduction for 250 cycles >95%, 0. 5 cycles Performance level B A Reference standard EN 61000-4-2: 95 EN 61000-4-3: 96 ENV 50204: 95 EN 61000-4-4: 95 EN 61000-4-5: 95 EN 61000-4-6: 97 EN 61000-4-8: 97 EN 61000-4-11: 94 Electrical fast transient Surge immunity Conducted RF immunity Power Frequency H-field immunity Voltage dips, interrupts B B A A C C B 2. 13 Reliability Specification 1 per 1014 bits read, max. 0. 5% Measurement type Nonrecoverable read errors Annualized Failure Rate (AFR) Load/Unload (U/UL) 25°C, 50% relative humidity 32°C, 80% relative humidity 5°C, 80% relative humidity 5°C, 10% relative humidity 55°C, 16% relative humidity Warranty 600, 000 software-controlled power on/off cycles 50, 000 hard power on/off cycles 600, 000 software-controlled power on/off cycles 50, 000 hard power on/off cycles For information regarding Warranty Support, visit http://www. seagate. com/www/en-us/support/warranty_&_returns_assistance 2. 13. 1 Free Fall Protection feature The Free Fall Protection feature provides enhanced data protection against shock events that may occur while the drive is operating. This feature is designed to decrease the likelihood of data loss by detecting a free fall event and unloading the actuator before a shock takes place in falls of >8 inches (nominal). The drive uses a 0G sensor mounted on the printed circuit board assembly (PCBA) to sense this event. To enable the Free Fall Protection feature on ST9500420ASG, ST9320423ASG, ST9250410ASG, ST9160412ASG, ST9120410ASG and ST980412ASG models, use Set Features command 41h. Information about Free Fall Events that have occurred is available through SMART Attribute FEh. The Free Fall Protection feature is provided only on ST9500420ASG, ST9320423ASG, ST9250410ASG, ST9160412ASG, ST9120410ASG and ST980412ASG models. 14 Momentus 7200. 4 SATA Product Manual, Rev. C 2. 14 2. 14. 1 Agency certification Safety certification The drives are recognized in accordance with UL 60950-1 and CSA C22. 2 (950) and meet all applicable sections of IEC 60950-1 and EN60950-1 as tested by TUV North America. 2. 14. 2 Electromagnetic compatibility Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024. Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products. Korean BCC If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Broadcasting Communications Center (BCC) Ministry of Information and Communication Republic of Korea. These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab. · Certificate number: STX-72004 (B) · Trade name or applicant: Seagate Technology LLC · Date of certificate: October 30, 2008 · Manufacturer/nationality: USA and China Australian C-Tick (N176) If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA). 2. 14. 3 FCC verification These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually marketed to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required. [. . . ] Maximum value: 0000FFFFFFFFFFFFh. Value 0000H 0000H 0508H 0000H 0048H 0040H 003EH 0000H 306BH 4001H 61E3H 30xxH 0001H 4000H xx7FH 0000H 0000H FFFEH xxxxH xxxxH 0000H ST9500420AS = 976, 773, 168 ST9500420ASG = 976, 773, 168 ST9320423AS = 625, 142, 448 ST9320423ASG = 625, 142, 448 ST9250410AS = 488, 397, 168 ST9250410ASG = 488, 397, 168 ST9160412AS = 312, 581, 808 ST9160412ASG = 312, 581, 808 ST9120410AS = 234, 441, 648 ST9120410ASG = 234, 441, 648 ST980412AS = 156, 301, 488 ST980412ASG = 156, 301, 488 0000H 1 = Free Fall Protection supported 0 = Free Fall Protection not supported 1 = Free Fall Protection feature is enabled 0 = Free Fall Protection feature is disabled 0000H 0001H 104­ 118 119 120 121­ 127 128 ATA-reserved Free Fall Protection support (bit 5) Free Fall Protection enable/disable (bit 5) ATA-reserved Security status 28 Momentus 7200. 4 SATA Product Manual, Rev. C Word 129­ 159 160­ 254 255 Description Seagate-reserved ATA-reserved Integrity word Value xxxxH 0000H xxA5H Note. See the bit descriptions below for words 63, 88, 93 and 94 of the Identify Drive data: Description (if bit is set to 1) Bit 0 1 2 8 9 10 Bit 0 1 2 3 4 5 6 8 9 10 11 12 13 14 Bit 13 Word 63 Multiword DMA mode 0 is supported. Ultra DMA mode 5 is supported Ultra DMA mode 6 is supported Ultra DMA mode 0 is currently active. Word 93 1 = 80-conductor cable detected, CBLID above VIH 0 = 40-conductor cable detected, CBLID below VIL Momentus 7200. 4 SATA Product Manual, Rev. [. . . ]