User manual SCHOLTES TIS 62 CL

[. . . ] Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance. The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may cause harm to people and animals or may damage property. [. . . ] For further information, please refer to the Technical description of the models. Switching off the cooking zones To switch off the hotplate, select the button corresponding to the desired zone, moving the slider towards the left to return to level 0, or press the Off button on the slider control directly. The first time the slider is pressed, a short beep will sound to acknowledge the touch. If - and only if the power level is adjusted, another short beep will sound when the slider is released. The hotplate selection LEDs light up for the power adjustment period (10 seconds), during which the slider (or min/med/max buttons)* can influence the selected hotplate. Switching on the hob To switch the hob on, press and hold the approximately one second. And buttons are pressed for an extended period of time, the timer scrolls quickly through the minute values in the corresponding direction. All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. The indicator light corresponding to the selected zone will start flashing. Control panel lock When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc. Press the button to lock the control panel: the indicator light above the button will switch on. Press the button for a few moments, the indicator light will switch off and the lock function will be removed. The 2 LEDs remain lit as long as the hotplates are linked (if EXTENSO TECHNOLOGY button is pressed again, the hotplates are disconnected and are both set to power level 0). Pressing the +, - or Max buttons for one of the two Flexi hotplates also affects the display corresponding to the other hotplate. A timer may be set for the EXTENSO TECHNOLOGY; this appears on the display and both LEDs corresponding to the linked hotplates light up. When the Timer button is pressed, the two linked hotplates are treated as if they were a single zone. Selecting and using EXTENSO TECHNOLOGY To begin using the EXTENSO TECHNOLOGY, press the button. EXTENSO TECHNOLOGY operation Once you have selected EXTENSO TECHNOLOGY by pressing the button , the 2 LEDs corresponding to the EXTENSO TECHNOLOGY for both hotplates light up; it will then be possible to control both as if they were a single zone. Once activated, the EXTENSO TECHNOLOGY can also be programmed, using the same procedure as described for the individual hotplates. Accessories For optimal EXTENSO TECHNOLOGY performance, we recommend the use of pans with an elliptical or elongated base and a major diameter of at least 250 mm; if using pans with a smaller diameter, we recommend positioning them in the upper or lower part as indicated by the X symbol. If the saucepan is not in the centre of the screen printing detail, you may hear a whistling sound or a slight buzzing noise; this does not indicate a hob malfunction. We recommend adjusting the position of the pan so that it is in the centre of the EXTENSO TECHNOLOGY zone GB 31 Practical advice on using the appliance GB ! [. . . ] To avoid any interference between your induction hob and a pacemaker, the latter must be designed to comply with relevant regulations. Please consult the pacemaker manufacturer or your doctor concerning its conformity or any possible incompatibility. The appliance is not intended to be operated by means of an external timer or separate remotecontrol system. disposal · When disposing of packaging material: observe local legislation so that the packaging may be reused. [. . . ]