User manual SCHOLTES TIC 740 DD L IT

[. . . ] Switching on the hob Switching on the cooking zones Switching off the cooking zones Programming the cooking duration Timer Control panel lock Switching off the hob "Demo" mode Practical advice on using the appliance Safety devices Practical cooking advice Before operating your new appliance please read this instruction booklet carefully. The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may cause harm to people and animals or may damage property. If the appliance is to be installed above an oven, the oven must be equipped with a forced ventilation cooling system. [. . . ] Each cooking zone is controlled using a selector button and a power adjustment device consisting of a double To begin operating a cooking zone, press the corresponding control button and set the desired power level (between 0 and 9) using the buttons Buzz: due to the vibration of the metallic parts that make up the induction element and the pot; it is generated by the electromagnetic field required for heating and increases as the power of the induction element increases. ⷠSoft whistle: heard when the pot placed on the heating zone is empty; the noise disappears once food or water is placed into the pot. To switch off a cooking zone, select it using the corresponding selector button · All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. A buzzer sounds for approximately 1 minute and the cooking zone switches off when the set programme has finished. Using multiple programmes and the display If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. The lights corresponding to the other hotplates programmed will be switched on. To visualise the time remaining for the other programmed hotplates, press the button repeatedly: the time remaining for each hotplate will be shown sequentially in clockwise order, starting from the front left hotplate. Use the button repeatedly until the duration you and buttons to set the new duration. When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc. Press the button to lock the control panel: the indicator light above the button will switch on. Press the button for a few moments, the indicator light will switch off and the lock function will be removed. If the control panel lock has been activated, the controls will continue to be locked even after the hob is switched on again. In order to switch the hob on again, you must first remove the lock function. It is possible to set the hob to a demonstration mode where all the controls work normally but the heating elements do not switch on. To activate the "demo" mode the hob must be switched on, with all the hotplates switched off. When the 6 seconds have elapsed, the ON/OFF and CONTROLS LOCKED indicator lights will flash for one second. At step 2, press the button: the duration decreases progressively until it reaches 0 and switches off. When the hob is switched on again it will be set to the "demo" mode. the display will show the text DE and OF and the hob will be switched off. Use cookware made from materials which are compatible with the induction principle (ferromagnetic material). We especially recommend pans made from: cast iron, coated steel or special stainless steel adapted for induction. When the temperature has reached a suitable level, this message disappears and the hob may be used again. [. . . ] It is designed not to create interference on any other electrical apparatus being used on condition that the apparatus in question also complies with this legislation. To avoid any interference between your induction hob and a pacemaker, the latter must be designed to comply with relevant regulations. Please consult the pacemaker manufacturer or your doctor concerning its conformity or any possible incompatibility. ⷠIf the surface of the hob is cracked, switch off the appliance to prevent electric shocks from occurring. [. . . ]