User manual SANYO VMC-L1015

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. ­1­ Precautions · Use only the power source specified on the unit. · When not using this unit for a long period of time, or when cleaning it, be sure to disconnect the power plug from the AC outlet. Do not overload wall outlets or power cords as this can result in a fire or electric shock. · Avoid using this unit under the following conditions: - in extremely hot, cold or humid places, - in dusty places, - near appliances generating strong magnetic fields, - in places subject to direct sunlight, - in badly ventilated places, - in automobiles with doors closed. [. . . ] Pin number Signal GND (Y) GND (C) Y C Audio-Out terminal (AUDIO OUT) For audio output. 4 2 4 2 IN 3 1 Audio-In terminal (AUDIO IN) For audio input. 1 2 3 4 OUT 3 1 ­3­ Connection instructions · When connecting, ensure the power supply to each unit is switched off. · The other devices and connection cables required are sold separately. 1 Connect the devices to the connection terminals at the rear panel. : Input signal (Refer to 2 for steps. ) Connection example DC IN : Output signal Computer VGA OUT VGA IN (Included VGA connecting cable) BNC OUT CCD Camera etc. BNC IN BNC OUT BNC IN Monitor TV etc. Y/C IN Y/C (S-VIDEO) OUT Y/C OUT Y/C (S-VIDEO) IN Hard-disk recorder etc. AUDIO LINE IN AUDIO OUT AUDIO IN AUDIO LINE OUT Amplifier etc. 2 Connect the power cord (DC 12V). Connect the included AC adapter plug to the power input terminal (DC IN), and then connect the AC cord between the AC adapter and AC outlet. · Once the power cord is connected, the power supply will reach the main unit. AC adapter (Included) AC cord (Included) ­4­ Instructions for use 2 A 2 B AUTO MODE 34 MENU 15 POWER 1 Switch the power button (POWER) on. R The power indicator light will light up. POWER 3 Adjust the brightness ( Decrease ) [0 ­ 51]. Power indicator light Increase 2 Press the input mode control (MODE) and choose the input signal. MODE · As the brightness is being adjusted, the symbol will be displayed in the upper left of the screen. 4 Adjust the contrast ( ) [0 ­ 51]. · Press once and the currently selected signal will be displayed. Press again and the available signal options will be displayed in the order shown below. (The symbol for selected option will be displayed in the upper left of the screen. ) Decrease Increase · As the contrast is being adjusted, the symbol will be displayed in the upper left of the screen. A Adjust the volume [0 ­ 51]. : Composite signal (BNC IN) : S-Video signal (Y/C IN) Decrease Increase : VGA signal (VGA IN) · As the volume is being adjusted, the symbol will be displayed in the upper left of the screen. : DVI signal (DVI IN) Cannot be used : Component signal (Y, Cb, Cr IN) Cannot be used B Screen automatic adjustment (For VGA signal) AUTO · When the signal is changed, initially a blue screen will be displayed, followed by the display of the chosen signal 2-3 seconds later. · When there is no input detected on the chosen signal, "NO SIGNAL" will be displayed. · If the power to the connected device is off, "VIDEO LOSS" will be displayed. R The clock, phase and screen position are automatically adjusted according to the specified input signal. is finished, 5 When viewing(POWER). press the power button R The power indicator light will go out. ­5­ Monitoring display adjustment Adjustment method for : Composite/ : S-Video signal selection s Operation 1 Press the adjustment control (MENU). R At the top of the screen, an adjustment panel as shown in the diagram to the right will be displayed. Adjustment item Composite In Color Tint Brightness Contrast Sharpness Volume H-Position Language Color Temp. Scan PIP Recall 2 Choose the adjustment item. Setting value NTSC 30 25 25 25 27 30 25 English 9300K Full Off Down MENU AUTO MODE POWER Up 3 Change the setting value. MENU 1 2 3 4 If necessary, repeat steps 2 and 3. · Pressing the adjustment control (MENU) again, or waiting for a number of seconds will cause the adjustment panel to disappear. s Adjustment item Item Color Tint Brightness Contrast Sharpness Volume H-Position Language Description Adjust the color. Parameters 0 ­ 51 0 ­ 51 0 ­ 51 0 ­ 51 0 ­ 51 0 ­ 51 0 ­ 51 English, Chinese, French, German, Spanish, Italian, Japanese 9300°K, 6500°K, Standard Over, Under, Full, 1:1 VGA, Off ­ Default setting 30 25 25 25 27 30 25 English Color Temp. Select to use Picture in Picture, showing an additional smaller display in the upper left corner. Pressing the +, ­ buttons together will return the settings to the default setting. 9300°K* Full Off ­ * May differ depending on location of purchase. · The settings will be retained even if the unit is switched off, but if the power supply is disconnected, settings will return to default. If the language setting is changed, the menu display will be in the language chosen. ­6­ Computer display adjustment : Adjustment method for VGA signal selection s Operation 1 Press the adjustment control (MENU). R At the top of the screen, an adjustment panel as shown in the diagram to the right will be displayed. Adjustment item VGA IN Brightness Contrast H-Position V-Position Clock Phase Color Temp. Volume PIP Language Recall Setting value 1024x768@60Hz 25 25 25 31 25 13 User color 51 51 51 25 25 30 Off English 2 Choose the adjustment item. MENU AUTO MODE POWER Down MENU Up 3 Change the setting value. 2 3 1 4 If necessary, repeat steps 2 and 3. · Pressing the adjustment control (MENU) again, or waiting for a number of seconds will cause the adjustment panel to disappear. s Adjustment item Item Brightness Contrast H-Position* V-Position* Clock* Phase* Color Temp. Adjust the clock (when vertical lines can be seen etc. ). · Make fine adjustments until the vertical lines disappear. Adjusting the clock will also change the width of the display. Parameters 0 ­ 51 0 ­ 51 0 ­ 51 0 ­ 51 0 ­ 51 0 ­ 51 9300°K, 6500°K, User color 0 ­ 51 0 ­ 51 0 ­ 51 0 ­ 51 0 ­ 51 0 ­ 51 Composite, S-Video, Component, Off English, Chinese, French, German, Spanish, Italian, Japanese ­ Default setting 25 25 25 31 25 13 User color 51 51 51 25 25 30 Off Adjust the phase (when the screen is flickering, etc. ). [. . . ] The warranty period commences on the date the product was first purchased or rented at retail. LABOR 1 YEAR PARTS 1 YEAR EXCLUSIONS This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model's instruction manual, or (B) the repair of any product whose serial number has been altered, defaced or removed. This warranty shall not apply to the cabinet or cosmetic parts, batteries or routine maintenance. This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product after repair. This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including, but not limited to, any malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to furnished instructions, shipping or transit accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood or other Acts of God, or normal wear and tear. [. . . ]