User manual SANYO VMC-8613

[. . . ] This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product after repair. This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including, but not limited to, any malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to furnished instructions, shipping or transit accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood or other Acts of God, or normal wear and tear. The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize any party to assume for it any other obligation or liability. SFC DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WITH REGARD TO THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS). [. . . ] Unauthorized substitutions may result in fire, electric shock or other hazards. 9. GROUNDING OR POLARIZATION -- This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. SAFETY CHECK -- Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition. 10. Do not locate video monitor or equipment where the cord will be abused by persons walking on it. 11. HEED WARNINGS -- Follow all instructions marked on the video monitor or equipment. 2 PRECAUTION If an abnormality does occur, turn the power switch off and unplug the unit. Do not use the monitor if it makes a strange noise, emits a strange odor, or if smoke comes out from it If used under these conditions, the monitor may cause a fire or electric shock. Immediately unplug it and wait to make sure no more smoke comes from it. Do not try to repair or open the monitor yourself. CONTENTS PARTS NAMES . 14 Do not allow the power cord to get damaged Do not place heavy objects on the power cord. Do not excessively bend the power cord, modify it, or secure it with staples. Doing so may damage the power cord and cause a fire or electric shock. Servicing should always be referred to your dealer or Sanyo Authorized Service Centre. 3 PARTS NAMES Front Panel Model: VMC-8613 245 6789 F 3 Model: VMC-8618 G 6789 SCAN 245 F 1 3 G 1 Speaker When the monitor selector button (A, B or Y/C) is pressed, the speaker lets you hear the sound from the components which are connected to the terminals at the rear of the monitor. (Use components which produce audio output. ) 3 Cursor (l) button (ã) When this button is pressed, the cursor moves down. In addition, this button is used to make adjustment values smaller. 2 On-screen display button (OSD) When this button is pressed, the menu screen appears on the monitor screen. 4 Cursor (j) button (») When this button is pressed, the cursor moves up. In addition, this button is used to make adjustment values larger. 5 Display selector button (ENTER) If this button is pressed while a picture is on the monitor screen, the screen changes to the adjustment screen. If the button is pressed once more, the picture returns to the previous screen. 6 Automatic screen selector button (SEQUENCE) For Model 8613 only When this button is pressed, the screen changes automatically to the picture from the components which are connected to the terminals at the rear of the monitor. DWELL TIME : Sets the automatic switching time (dwell time) for monitoring. Note: This is for Model 8613 only; it is not available with Model 8618. LANGUAGE : Changes only the screen display to one of six languages (ENGLISH, FRANCAIS, DEUTSCH, ESPANOL, ITALIANO, RUSSIAN). TITLE : Lets you display the title name (8 characters) on the screen for each component which is connected to the terminals at the rear of the monitor. VERSION : This item is for display only and cannot be changed. Underscan/overscan select button (SCAN) for Model 8618 only The initial setting is for the normal screen (overscan). [. . . ] Press the ENTER button, and then use the cursor l (j) button to select "C". 10 LANGUAGE SCREEN TABLE English Français Deutsch Menu Title/channel Automatic title/ channel selection Title settings COLOR adjustment TINT adjustment BRIGHTNESS adjustment CONTRAST adjustment SHARPNESS adjustment VOLUME adjustment DWELL TIME setting 11 LANGUAGE SCREEN TABLE Español Italiano Russian Menu Title/channel Automatic title/ channel selection Title settings COLOR adjustment TINT adjustment BRIGHTNESS adjustment CONTRAST adjustment SHARPNESS adjustment VOLUME adjustment DWELL TIME setting 12 TROUBLESHOOTING Solutions to common problems related to your monitor are describe here. If none of the solutions presented here solve the problem, unplug the monitor and consult a SANYO-authorized dealer or service center for assistance. Problems No picture with the power on Points to be checked Is the video signal being output from the connected component?Select the required video signal input with the monitor selector buttons. [. . . ]