User manual SANYO VA-SW5000

[. . . ] INSTRUCTION MANUAL VA-SW5000 CCTV Sysytem Management Software CONTENTS FOREWORD . q Displaying multiple quad screens in order b Single screen display (channel specify window). 23 24 25 25 25 26 26 27 27 29 30 31 31 31 32 32 32 32 33 33 33 33 34 34 34 34 35 36 PLAYING BACK RECORDED IMAGES . 38 40 40 41 42 43 45 45 46 47 49 52 54 55 57 59 61 English ­1­ CONTENTS SETTINGS SETTING DVR OPERATING CONDITIONS . [. . . ] No other operations can be carried out while copying is in progress. 7 Completion of copying. The message "The copy to a backup domain was completed. " will be displayed. After you click to close the dialog box, the display will return to the live images that were being displayed before the copying started. English ­ 61 ­ SETTINGS This section explains how to view the various settings and management information for the administrator user such as DVR and user registrations. This software is management software for a monitoring system, and so it is equipped with a wide range of functions for system operation and support to allow it to be used effectively to cope with different administrator needs. SETTING DVR OPERATING CONDITIONS SETTING DVR OPERATING CONDITIONS . P111 ­ 62 ­ English SETTINGS SETTING DVR OPERATING CONDITIONS The [DVR INFO SETUP] menu is used to set the operating conditions for DVRs. Each of the menu settings is normally carried out at the DVRs themselves, but if required, the settings can also be made and changed at the computer. This manual gives a brief description of the menus and the basic operating procedures. For more detail, refer to the instruction manual that is provided with the DVR. b [DVR INFO SETUP] menu Operations using this menu are limited to the administrator user. CLOCK SET] [TIMER PERIOD SET] [SUMMER TIME SET] [HOLIDAY SET] [TITLE SET] [RECORDING AREA SET] [RECORDING CONDITIONS SET] [NORMAL REC MODE SET] [PROGRAM REC SET] [TIMER SET] [ALARM REC MODE SET] [ALARM OPERATION SET] [MOTION SENSOR SET] [DISPLAY SET] [BUZZER SET] [RS-232C/RS-485 SET] [HDD SET] [SECURITY LOCK SET] [NETWORK SET] [NETWORK CONTROL SET] [USER ID SET] Contents Sets the DVR clock. Adjusts the setting time for external devices to match the DVR setting time. Divides a day into four time zones (used for functions such as automatic sequencing). Sets days that are to be monitored according to the conditions set for Sundays, such as public holidays and commemorative holidays. Assigns the capacities for each recording area and starts recording again when recording has stopped because of a recording area becoming full. Sets overwrite recording operations and sets the standard value for remaining space warning. Sets the recording conditions for normal recording and timer recording. Sets combinations of cameras to be recorded, and sets each individual recording rate. Sets the recording conditions for alarm recording and pre-alarm recording. Sets the display method for images on the monitor while alarm recording is in progress. Sets the alarm detection conditions for the motion sensors that are built into the cameras. When operating the system using a system controller, makes the interface settings at the DVR. Displays the hard disk recording capacity, initializes the hard disk and sets mirroring. (Limited to DSR-5009P, DSR-5016 and DSR-5016P only) Sets conditions for network connections and [PASSWORD] settings for logging in. Sets the [USER ID], [PASSWORD] and operating user levels at the DVRs. 1 [INITIAL SET] [RECORDING SET] [GENERAL SET] 2 3 4 5 6 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 English ­ 63 ­ SETTING DVR OPERATING CONDITIONS b [DVR INFO SETUP] menu (continued) Menu 1 [DISPLAY SET] 2 3 4 5 [MULTI SCREEN SET] [SEQUENCE SET] [MAIN MONITOR/MONITOR2 SET] [MASK SET] [COLOR LEVEL SET] Contents Sets the display positions for images from each channel in the monitor's multi screen display. [. . . ] Adds a new download pattern by copying existing information from another download pattern. Buttons indicated by "" are standard functions in the [SYSTEM MANAGEMENT] menu. Refer to the explanations at the beginning of this chapter for details on the operating procedures. (P. 71 ­ 72) q q English ­ 115 ­ DOWNLOAD INFORMATION MANAGEMENT AND AUTOMATIC MODE SETTINGS a Adding a new download pattern When you click download pattern registration list. [. . . ]