User manual SANYO TLS-1960P

[. . . ] Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. CAUTION: Do not put your hand or other objects in the cassette loading slot because of risk of injury or accident. Only) The wires in the mains lead are coloured according to the following code: Blue: Brown: Neutral Live ADVARSEL Eksplosjonsfare ved feilaktig skifte av batteri. [. . . ] œ Continue turning the JOG dial to display the next (or previous) 10 alarm recording entries. When the number of alarm recording entries reaches 100, the older ones are erased as new ones are memorized. NOTE: œ If the MENU RESET button is pressed while the (ALARM LOG) menu is displayed, the displayed data is erased. May, 08/2002 ALARM RECORDING Alarm Search To go to the beginning of a desired alarm recording. Alarm Scan To look for an alarm recording by viewing the first 5 seconds of each alarm recording. 3 Press the REC/PLAY SPEED l (or j) button to set the desired alarm number (01 to 99), then turn the SHUTTLE ring clockwise (or counterclockwise). ø The desired alarm is searched for and a still image of the beginning of the alarm recording appears on-screen. ø The unit will advance (or rewind) the tape at high speed and playback the first 5 seconds of every alarm recording. NOTE: œ The alarm number is relative to the actual tape position. œ If the end of the tape is reached during a scan, the tape will rewind and stop. œ This function does not operate when a warning display appears on the digital display. œ Follow the Before starting steps, under “NORMAL RECORDING”. 2 Turn the JOG dial until the “SAT” (Saturday) line is highlighted, then turn the SHUTTLE ring clockwise. 3 Turn the JOG dial, to set the desired start day of the week (ex: FRI), then turn the SHUTTLE ring clockwise. 4 Turn the JOG dial to set the recording start hour (ex: 21), then turn the SHUTTLE ring clockwise. 5 Turn the JOG dial to set the recording start minutes (ex: 00), then turn the SHUTTLE ring clockwise. 6 Turn the JOG dial to set “**” for the recording stop hour, then turn the SHUTTLE ring clockwise. ø The rest of the line settings will change to “**:** *** *”, the day of the next line will change to the next day and the start time will change to “**:**” automatically. 7 Turn the JOG dial to set the desired stop day of the week (ex: MON), then turn the SHUTTLE ring clockwise. 8 Turn the JOG dial to set the recording stop hour (ex: 07), then turn the SHUTTLE ring clockwise. 9 Turn the JOG dial to set the recording stop minutes (ex: 00), then turn the SHUTTLE ring clockwise. F Turn the JOG dial to select the recording speed mode (ex: 96), then turn the SHUTTLE ring clockwise. [. . . ] NOTES: œ If the security lock is engaged, it has to be released before proceeding to the inspection. œ If any problem is discovered during the inspection, turn off the VCR, unplug the power cord then consult your dealer. About the Backup Battery The date and time settings are maintained for up to 30 days by a rechargeable lithium battery that is fully charged after the VCR has been connected to a power source for 48 hours or more. For replacement and disposal of the old battery, please contact your dealer. [. . . ]