User manual SANYO SRT-6000

[. . . ] INSTRUCTION MANUAL SRT-6000 English Français Español Real Time Video Recorder Enregistreur vidéo en temps réel Videograbador en tiempo real Please read this manual and accompanying "IMPORTANT SAFETY INSTRUCTIONS" sheet carefully before connecting your VCR and operating it for the first time. Keep the manual in a safe place for future reference. PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or other moisture. [. . . ] oe Follow the Before starting steps, under "NORMAL RECORDING". 9 Turn the SHUTTLE ring to set the recording stop hour (ex: 07), then turn the JOG dial clockwise. ø The recording stop minutes position starts flashing. 1 Press the MENU button until the (TIMER SET) menu is displayed. oe "SUN" (Sunday) will be flashing. F Turn the SHUTTLE ring to set the recording stop minutes (ex: 00), then turn the JOG dial clockwise. ø The "SPD" (recording speed) position will start flashing. 2 Turn the JOG dial, until "SAT" is flashing. 3 Turn the SHUTTLE ring to set the desired start day of the week (ex: SAT), then turn the JOG dial clockwise. ø The recording start hour position starts flashing. G Turn the SHUTTLE ring to select the recording speed mode (ex: 40), then turn the JOG dial clockwise. ø "N" will start flashing. H Turn the SHUTTLE ring to select "Y". ---@N 4 Turn the SHUTTLE ring to set the recording start hour (ex: 21), then turn the JOG dial clockwise. ø The recording start minutes position starts flashing. 5 Turn the SHUTTLE ring to set the recording start minutes (ex: 00), then turn the JOG dial clockwise. ø The recording stop hour position starts flashing. I Follow steps F and G under "PROGRAM TIMER RECORDING" on page 20. 6 Turn the SHUTTLE ring to set "öö" for the recording stop hour. ø The rest of the line settings will change to "öö:öö ööö ö", the day of the next line will change to the next day and the start time will change to "öö:öö" automatically. 7 Turn the JOG dial clockwise. ø The day of the week of the 8th line is flashing. English 21 PROGRAM TIMER RECORDING Setting the Holidays By setting the holidays, timer recording will be conducted on those days, as set for Sundays. Changing a Program Timer Recording 1 Press the MENU button until the (TIMER SET) menu is displayed. 1 Press the MENU button until the (HOLIDAY SET) menu is displayed. ----- 2 Turn the JOG dial, until the setting to correct is flashing. 3 Turn the SHUTTLE ring, to correct the setting. 5 Press the TIMER button. 2 Turn the SHUTTLE ring to set the month of the holiday, then turn the JOG dial clockwise. To Cancel a Program Timer Recording 1 Press the MENU button until the (TIMER SET) menu is displayed. 3 Turn the SHUTTLE ring to set the day of the holiday. ø Repeat steps 2 to 4 to set up to 20 holidays. 2 Turn the JOG dial, until the "Y" corresponding to the timer recording to cancel is flashing. 5 Press the SEARCH button to save the settings. ø The setting procedure is now completed. 3 Turn the SHUTTLE ring, to select "N". 5 Press the TIMER button. NOTE: oe If setting holidays, be sure that a timer recording is set for Sunday. oe If a timer recording for Sundays is entered, the holidays timer recording will not function if the program timer recording mode is set to "N". oe To erase a setting, follow the same procedure as above, but at step 2 and 3, enter "--" instead of a setting. To Cancel all Program Timer Recordings 1 Press the MENU button until the (TIMER SET) menu is displayed. 2 Press the MENU RESET button. ø All programmed timer recordings are erased. 3 Press the SEARCH button, the normal screen is displayed. 22 English PROGRAM TIMER RECORDING NOTES: oe During timer recording or timer recording stand-by, all the buttons on the VCR, except the TIMER button and the buttons to set/cancel the security lock (see page 30), are disabled. When the power is restored, the recording will resume if the stop time has not yet been reached, and "P" will be displayed on the digital display. The VCR internal battery is completely recharged after the VCR has been connected to a live outlet for 48 hours, and it will maintain all the VCR settings memory for up to 30 days. oe Set the timer recordings so that the recording times do not overlap. If they do, the one with the earliest recording start time will have priority. (See chart below. ) 7:00PM Program 1 Program 2 Program 3 8:00PM 9:00PM 10:00PM These portions will not be recorded oe To set two or more timer recordings for a same day of the week, turn the JOG dial, until the day of the week for the second recording is flashing, then turn the SHUTTLE ring, to set the desired day of the week. [. . . ] This periodic maintenance check table changes considerably according to the using conditions and environment. Refer to (USED TIME) menu for the length of time the unit has been used. As life may be shortened if foreign particles and dusts remain accumulated on the tape guides and rotating and contacting portions, clean if dirty. Dusts and other foreign particles on the tape guides may also shorten the tape life and lower picture quality, therefore clean thoroughly. English 39 TROUBLESHOOTING GUIDE If the unit does not operate normally when you follow the instructions indicated in the manual, please refer to the table below. [. . . ]