User manual SANYO SLIM-1500

[. . . ] i This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] ^: The noise-reduction function is enabled. Select the desired icon from the noise reduction menu, and press the SET button. h This completes the noise-reduction setting. NOTE i The noise-reduction function is effective when the shutter speed 1/4 second or less. i Compared to normal shooting, the image processing time after shooting is slightly longer. 79 English FLICKER-REDUCTION The flicker-reduction setting reduces the flicker that results when filming video clips under fluorescent lights and the like where the background lighting pulsates at the frequency of the power supply. The flicker-reduction setting is set to a frequency of 50 Hz. 1 2 3 Display the PAGE 2 Shooting Setting Screen (page 62). Select the o icon from the flicker-reduction menu, and press the SET button. h This completes the flicker-reduction setting. HINT i If the flicker-reduction setting is used outdoors on a very bright day, a halation effect may occur. English 80 ISO SENSITIVITY With the initial settings, the ISO sensitivity is automatically set according to the brightness of the subject. However, the ISO sensitivity can be set to a fixed setting. 1 2 Display the PAGE 2 Shooting Setting Screen (page 62). t: Sets the ISO sensitivity automatically (equivalent to ISO50 to 200 [video clip shooting mode: ISO200 to 800]). *: Sets the sensitivity to ISO50 equivalent (video clip shooting mode: ISO200). u: Sets the sensitivity to ISO100 equivalent (video clip shooting mode: ISO400). v: Sets the sensitivity to ISO200 equivalent (video clip shooting mode: ISO800). Use this adjustment when the monitor image is difficult to view because of ambient lighting. In addition, in very bright surroundings, such as outdoors on a sunny day, you can turn the backlight OFF to preserve battery power. 1 2 Display the PAGE 1 Playback Setting Screen (page 84). Adjust the brightness: Toggle the SET button left or right. LCD BRIGHTNESS LCD BACKLIGHT ON/OFF ADJUST 0 3 Press the SET button. h The brightness is set, and you are returned to the Playback Setting Screen. HINT i From the Shooting Screen, you can quickly access the screen for adjusting the brightness of the LCD monitor by pressing the MENU button for at least 1 second. 89 English IMAGE PROTECT Prevent accidental erasure of image and audio data. 1 2 Display the data that you want to protect from accidental erasure, and display the PAGE 1 Playback Setting Screen (page 84). h If the protect mode has already been enabled for the data, then "UNLOCK?" appears. PROTECT LOCK?YES EXIT 3 Toggle the SET button up or down to select "YES", and press the SET button. h To return to the Playback Setting Screen, press the MENU button. PROTECT UNLOCK?YES EXIT English 90 IMAGE PROTECT CAUTION i Even if the protect mode is set for certain data files, they will be erased if the card is reformatted. The protect mark B will disappear and the protect mode is canceled. 91 English ERASING DATA You can erase data that is stored on the card if you no longer need it. You can erase the data one at a time, or all at once. 1 2 Display the PAGE 1 Playback Setting Screen (page 84). EXIT: Returns to the Playback Setting Screen. ERASE ONE ERASE ERASE ALL EXIT 3 Toggle the SET button up or down the select the erase mode, and press the SET button. [. . . ] i Sanyo Electric shall not be held responsible for any problems resulting from the use of this camera. i Sanyo Electric declines all responsibility for damages due to improper use of the camera, failure to adhere to the instructions given in this manual, or repairs or changes done by those other than a technician authorized by the manufacturer. i Sanyo Electric shall not be held responsible for any damage caused by optional devices or consumable items used with the camera other than those supplied with the camera or those specified by Sanyo Electric. i Sanyo Electric shall not be held responsible for any losses or loss of revenue resulting from the loss of data caused by the malfunction, or the repairing of a malfunction, of the camera. [. . . ]