User manual SANYO NC-MDU01

[. . . ] Features Operating Instructions Cautions for Battery Charger Usage WARNING! · This charger is only for AA and AAA Ni-MH batteries made by SANYO. The available power required may be exceeded and the computer may be damaged or data may be lost. [. . . ] 500 mA DC 1. 2 V, 850 mA x 1 (Quick), 450 mA x 2 eneloop Ni-MH AA (typ. 120 min AA/AAA USB Charger Ni-MH Operating Instructions · This is a small and slim eneloop charger for AA and AAA HOW TO CHARGE 1. · Lower the adjuster to charge AAA batteries. PARTS DESCRIPTION Adjuster (+) contact Raise for AA batteries Lower for AAA batteries LED Charge indicator Cord USB connector USB housing (-) contact for AA and AAA (*) Guideline value only; actual charging times may vary slightly. 47 g Charging temperature 0 °C ­ 40 °C range Connector type USB type A Compatible computer Models with a USB port as standard equipment where the computer manufacturer guarantees models the operation of the USB port and has a USB port fitted as Standard equipment. HOW TO INSERT THE BATTERY Depending on whether the adjuster is raised or not, one or two AA or AAA batteries can be charged. Raise the adjuster for AA batteries Lower the adjuster for AAA batteries ster · AA and AAA batteries cannot be charged at the same time. Insert the USB connector of the charger into the USB port of an operating computer. Note: Do not connect other equipment to other USB ports on the computer while charging or the required Power may be exceeded. The power supply capacity may be exceeded and charging may become impossible or the computer may be damaged and important data may be lost. When charging has been completed the LED Charge indicator remains lit. Remove the USB connector from the USB port of the computer and remove the battery (batteries). · Directly after completion of charging, the battery is hot, but this is normal. [. . . ] every 1. 5 sec ­­­­­­­­­­­ Steady - - - - - - - - - - - Approx. every 0. 5 sec Not lit Temperature range Discharging (battery use) Charging Storage -5 °C ­ 50 °C 0 °C ­ 40 °C -20 °C ­ 30 °C Charging Charging completed (*) Battery abnormal Stop during charging (computer standby mode etc. ) Usage outside of these temperature ranges may decrease the performance and/or the life of the battery. (*) When two batteries are being charged, the condition where charging of both batteries has been completed. [. . . ]