User manual SANYO SBM-20

[. . . ] · "INSTRUCTION MANUAL: ADVANCED" explains detailed particulars of the camera functions. · "SANYO Software Pack INSTRUCTION MANUAL" explains how to use your camera in conjunction with a computer. Warning TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE kFOR AMERICAN USERS The following advisory is included in accordance with the laws of the State of California (USA): WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, birth defects or other reproductive harm. i This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] (The backup will last for about 7 days. ) It is recommended to check that the date and time settings are still correct after replacing the battery pack and before shooting or recording of any type (follow steps 1 to 3). To correct the date and time settings i In step 4, select the indication that you want to change, and follow the procedure to change the indication. English 18 BASIC OPERATION BEFORE TAKING PICTURES Switching between the recording mode and playback mode Switch between shooting and playing. 1 2 Press the ON/OFF button to turn the camera on. ON/OFF button Playback button [=] Press the playback button [=]. h Each time the playback button is pressed, the camera switches between the recording mode and the playback mode. 149 <Recording mode> 100-0001 2009. 12. 24 2008. 12. 24 <Playback mode> HINT To turn the camera on in the playback mode i Press the playback button [=] for at least 1 second, and the camera will turn on in the playback mode. 19 English How to switch the recording mode Your camera can capture single still photos (single-shot mode), record video clips (video clip recording mode), and also capture a series of still photos (sequential shots mode). 1 2 Press the ON/OFF button to turn the camera on. h An icon in the upper left area of the monitor indicates the active recording mode setting. ON/OFF button [m] button 3 4 SET button 149 <Recording mode> s: Single-shot mode : High-speed sequential shots mode O: Sequential shots mode X: Video clip recording mode English 20 BEFORE TAKING PICTURES Switching the display mode In the recording mode, you can select the either the "settings display mode" which allows you to confirm the shooting settings on the monitor while you shoot, or the "normal display mode" in which the setting indications are turned off, providing a full view of the subject. 1 2 Press the ON/OFF button to turn the camera on. h Each time the SET button is pressed, the camera switches between the settings display mode and the normal display mode. ON/OFF button SET button 149 <Settings display mode> <Normal display mode> 21 English Adjust the monitor brightness The brightness of the monitor is adjustable. Adjust the brightness to the optimum readability in the ambient light. 1 2 Press the ON/OFF button to turn the camera on. h The monitor brightness is set, and the monitor brightness menu is canceled. ON/OFF button MENU button 3 4 [n] and [o] buttons Monitor HINT i You can also adjust the monitor brightness by selecting "BRIGHTNESS" from the Option Menu. English 22 BEFORE TAKING PICTURES Hints for taking pictures Muting the camera sounds i The operation sounds that are generated, for example, when the shutter button, MENU button or SET button is pressed, can be muted. i All the image and sound data is recorded in the camera's internal memory or on the card installed in the camera. i When a card is installed in the camera, the data is recorded on the card. If no card is installed, the data is recorded in the camera's internal memory. i When taking pictures with the light coming from behind the subject, due to the characteristics of the CCD, light lines or ghost patterns (flare effect) may appear in the captured image. i The self-timer and flash do not operate when shooting sequential shots. \]H_a5n 27 English Viewing still images The steps for viewing both single shots and sequential shots are the same. 1 Press the playback button [=]. h If the playback button [=] was pressed to turn the camera on, however, press the playback button [=] for at least 1 second. <If the camera was turned on by pressing the playback button [=]> h When the playback button [=] or ON/OFF button is pressed, the camera turns off. Playback button [=] 2 100-0001 2009. 12. 24 When you are finished viewing images. . . i Press the ON/OFF button to turn the camera off. i When the shutter button is pressed, the voice memo is played back. English 28 CAPTURING AND PLAYING BACK STILL IMAGES 9-image/20-image display playback 1 2 Press the playback button [=]. h Press the arrow buttons to move the orange frame to the desired image, and press the SET button. Instead of pressing the SET button, you can press [T] ([]]) on the zoom switch to show the image full screen. h If [W] ([P]) on the zoom switch is pressed while the 9-image display is shown, the display changes to the 20-image display. Zoom switch [W]/[T] 3 SET button Arrow buttons Video clip Still image Orange frame 100 0001 0004 0007 Audio recording Folder number 0002 0005 0008 0003 0006 0009 Image number 29 English Folder playback A convenient way to search through multiple folders, or to search for an image that was recorded using Screen Capture. 1 2 Access the 9-image display screen (page 29). h If [T] ([]]) on the zoom switch is pressed, the camera changes to the 20-image display (page 29). OK SELECT FOLDER 1 2 3 100SANPH 101SANPH 102SANPH SELECT 3 Select the desired folder, and press the SET button. h At this time, if you press [W] ([P]) on the zoom switch, the images in the selected folder are shown in the 9-image display. English 30 CAPTURING AND PLAYING BACK STILL IMAGES Magnifying (zooming in) the image 1 2 Display the image that you want to magnify. h The image is magnified, and the central portion of image is displayed. [. . . ] 2 seconds when the scene function is set to fireworks Hetc. ) (During flash: 1/30 to 1/1, 500 sec. ) Sequential shots mode: 1/2 to 1/1, 500 sec. Single-shot mode/sequential shots mode (standard output sensitivity): Auto (ISO64 to 400)/ISO64, ISO100, ISO200, ISO400, ISO800, ISO1600, and ISO3200 (switchable from Recording Menu) Video clip recording mode: Auto (ISO384 to 2400)/ISO384, ISO600, ISO1200, ISO2400, ISO4800 (switchable from Recording Menu) * Sensitivity measured in compliance with the ISO standard (ISO 12232:2006). 3. 0× optical zoom lens English 56 SPECIFICATIONS Monitor 2. 7-inch (6. 9 cm) TFT color LCD Approx. 60 cm (23. 62 in. ) to 1. 7 m (5. 58 ft. ) (Tele) Auto-flash, forced flash, flash off, red-eye reduction TTL-type AF (9-point range finder/spot focus/ AF seeker), manual focus (14 steps) Approx. 2-second delay, 10-second delay 0 to 40°C (32 to 104°F) (operation), ­20 to 60°C (­4 to 140°F) (storage) 30 to 90% (operating, no condensation) 10 to 90% (storage, no condensation) Lithium-ion battery pack (DB-L80) × 1 92. 8 (W) × 55. 2 (H) × 17. 0 (D) mm 3. 65" (W) × 2. 17" (H) × 0. 67" (D) Approx. [. . . ]