User manual SANYO RMT-U130

[. . . ] After 10 seconds, these keys will reve rt to normal channel and volume operat i o n . 2) Some equipment manufacture rs use the CHANNEL and VOLUME keys instead of CURSOR keys to navigate through their menu systems. [. . . ] 126, 156, 118, 124, 125, 138, 150, 151, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155, 132, 135, 148, 101, 103, 107, 111, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 115 6) Operations in the chart that are marked with an asterisk (*) work when the menu is displayed (after pressing the MENU key). 7) To operate each device (VCR, TV, Cable Converter Box, or DVD Player), you must first prog ram the remote control; then press the proper mode key (VCR, TV, or AUX). 8) Code numbers will remain in memory for five minutes as you replace batteries. 9) The AUX mode can be programmed to o p e rate a VCR, TV, C able Conve rter Box, or DVD Player, but only one device at a time. 10) Remove batteries from the remote control if it will not be used for a month or more. 11) There may be brands and models that this remote control cannot operate. 12) This remote control uses an infra red beam of light to operate the equipment. Objects between the equipment and the remote control can bl o ck this infra red beam. Th e re fo re, the remote control must be pointed directly at the equipment you want to operat e. Step 2. P ress and hold the V C R, TV, or AUX mode key while e n t e ring a three-digit code number. If the code was accepted, the mode key will flash 5 times after it is re l e a s e d. Check the code nu m b e r and rep e at Step 2. Television Codes Admiral . . . . . . . . . . . . . . . . [. . . ] 222 Glow Keys Model RMT-U130 3-Function Multimedia Remote Control Owner's Manual Visit our website at for assistance. www. sanyoctv. com OBLIGATIONS For 90 days from the date of purchase, Sa nyo Manufacturing Corporation warrants this product to be free from defects in material and workmanship under normal use and conditions. Should replacement be necessary under this warranty for any reason due to manufacturing defect or malfunction during the first 90 days from date of original purchase, Sanyo Manufacturing Corporation will provide a new remote control via exchange at the retailer at no charge. [. . . ]