User manual SANYO RM-X106W

[. . . ] The power cord of the apparatus should be unplugged from the outlet when left unused for a long period of time. This apparatus shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. The apparatus should be situated so that its location or position does not interfere with its proper ventilation. [. . . ] The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc. Do not install this apparatus in a confined space, such as a book case or built-in cabinet. Minimum distance (about 100mm) around the apparatus for sufficient ventilation. No naked flame sources such as lighted candles should be placed on the apparatus. Do not use where there are extremes of temperature (below C or exceeding 35 C). Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Attention should be drawn to the environmental aspects of battery disposal. For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Page 3 INSTRUCTION MANUAL RM-X106W AM/FM Clock Radio 1. AC cord Setting Alarm icon Alarm icon Sleep icon Snooze icon Display time Page 2 Refer any servicing to qualified personnel. Remove the batteries to avoid leakage if they are not be used for a prolonged period. In the interest of environmental safety, dispose of battery safely. SETTING THE ALARM 1. If you set alarm by BUZZER, slide BUZZ SMALL/LARGE switch to desired location. While holding the ALARM button down, AL appears on the top-right of the LCD, then press the HOUR or MIN(Minute) button respectively to select the wake-up time. Note: If you want to check the alarm time setting, simply push the ALARM button. LIGHT HIGH/LOW FUNCTION Slide LIGTH HIGH/LOW switch to select the desired brightness of the display. AUX IN FUNCTION 1. Connect the external audio equipment to AUX IN jack on the back of the unit. Rotate the VOLUME knob to select the desired sound level. BATTERY BACK-UP SYSTEM This unit includes a battery back-up system which protects the clock, sleep timer and wake-up alarm functions from the mains failure with the battery installed. During the mains interruption, the clock display will go out, but the clock movement remains in operation. When the mains lead is connected to the AC outlet for the first time, or when the mains returns after a failure longer than the battery life. [. . . ] When the mains lead is connected to the AC outlet for the first time, or when the mains returns after a failure longer than the battery life. If you want to wake up with the radio, tune in the station and adjust the volume level first. (See "SETTING THE ALARM". ) Set the ALARM OFF/BUZZ/RADIO switch to ALARM-RADIO or ALARM-BUZZ. [. . . ]