User manual SANYO RM-DB5

[. . . ] 2 PRECAUTIONS Keep the radio away from heating appliances and electric sources that could cause static on the radio such as fluorescent lamps and motors. If you experience a ringing in your ears, reduce the volume or discontinue use. [. . . ] Do not install this equipment in a confined space, such as a book case or built in cabinet. No object filled with liquids, such as vases, shall be placed on the apparatus. CONTROLS (Fig. Alarm function switch (ALARM BUZZ/RADIO/OFF) Earphone socket (EAR) Time Set button (TIME SET) Alarm button (ALARM) Snooze button (SNOOZE) Sleep button (SLEEP) Hour button (HOUR) Minute button (MINUTE) Tuning control ( TUNING ) Band switch (BAND) Volume control (VOLUME) Display Alarm Stop button (ALARM STOP) Radio On/Off Aux switch (RADIO AUX/ON/OFF) Aux In jack (AUX IN) 3 BACK-UP BATTERY INSTALLATION (Fig. 2) Connect a standard 9V (006P/6F22) battery (not included) to the snap-on terminal matching the polarity. NOTE: If the time display is blinking when the mains returns after a failure, the back-up battery is exhausted and must be replaced. BATTERY BACK-UP SYSTEM This unit incorporates a battery back-up system which protects the clock, sleep timer and wake-up alarm functions from the mains failure with the battery installed. If you want to alarm with the radio, tune in the station and adjust the volume level first. (See "ALARM TIME SETTING". ) Set the ALARM BUZZ/RADIO/OFF switch to ALARM-RADIO or ALARM-BUZZER. The timer is set STOP THE ALARM At the preset alarm time, the alarm sound, then turns off after 1 hour and 59 minutes. To turn off the alarm so it does not sound again, set ALARM BUZZ/RADIO/OFF to OFF. To reset the alarm to sound again at the same time the next day, set it back to BUZZER or RADIO. 6 USING THE SLEEP TIMER 1. To select the desired time, while holding the SLEEP button down, push the HOUR (once) or MINUTE button repeatedly to select the sleep time (up to 1 hour and 59 minutes). [. . . ] Release the SLEEP button. NOTES: To release the sleep timer while in operation, push the SNOOZE button. If the SLEEP button is pushed while in operation, it returns to "0:59" as above. AUX IN FUNCTION 1. [. . . ]