User manual SANYO RBCC70 SUPPLEMENTARY GUIDE

[. . . ] If any of these items is missing, please contact your place of purchase. POA-SR-160 Smoke Resistant Unit x1 POA-FIL-160 Smoke Resistant Filter x1 Printed in Japan 1AA6P1P5973-- (IJAJ) Using the Optional Smoke Resistant Unit 1 2 3 4 Press the ON/STAND-BY button on the side control or the STAND-BY button on the remote control, flip the Main On/Off Switch off, and then unplug the AC power cord from the AC outlet. Insert the Smoke Resistant Unit into the projector completely and fix it with the 2 screws. [. . . ] Plug the power cord, power on the projector and reset the filter counter. AMC Unit Screws - Tighten the screws securely. If the screws are not tighten securely, the Smoke Resistant Unit is possibility falling. - When the unit is not installed properly, the projector failed to light. Setting the Filter Counter Timer for Smoke Resistant Unit - When using this Smoke Resistant Unit, we recommend to set the "Display" function to "On" . If the "Display" function cannot be set to "On", We recommend to periodically check the "Filter counter" menu for monitoring the filter condition. Filter counter Use the Point ed buttons to select Filter counter and then press the Point 8 or the SELECT button to access the submenu items. The Filter counter is displayed in red when exceeding the Filter Counter Menu setup time in the Filter counter timer, or filter clogging was detected. Shows the remaining value every 10%. - When the remaining value reaches 10%. . . - When the remaining value reaches 0%, the WARNING FILTER indicator lights up. Filter counter timer . to the sales dealer: POA-FIL-160 English CAUTION · When the "Filter counter remaining" reaches 10%, it is recommended to replace with a new filter. When installing the projector, however, please keep it well away from a smoke generation device. When the "Filter counter remaining" becomes 0% within 12 hours of using, please check the location of the projector and the environment. If it is used near the smoke generation equipment, it may result in malfunctions. If the projector is used repeatedly in a smoky environment, inspection or repairs may be required. · When the Smoke Resistant Unit remarkably dirty, please replace the whole unit. · When using the Smoke Resistant Filter, the operating temperature ranges from +41°F to +104°F (from +5°C to +40°C). [. . . ] · When the Smoke Resistant Unit remarkably dirty, please replace the whole unit. · When using the Smoke Resistant Filter, the operating temperature ranges from +41°F to +104°F (from +5°C to +40°C). [. . . ]