User manual SANYO POAPN01

[. . . ] POA-PN01 Preparation Installation Basic Setting and Operation Controlling the Projector Controlling the Multi-Projectors Controlling External Equipment Appendix INSTALLATION and OPERATION of the PJ-Net Organizer This PJ-Net Organizer is an optional product to control and set up a projector via a network. By accessing the connected projector using the web browser on your computer, the projector can be controlled and set up remotely. This product is only used for SANYO projectors that have a terminal for the PJ-Net Organizer. This manual explains the installation of the PJ-Net Organizer and its operation. OWNER'S MANUAL Preparation Compliances Federal Communication Commission Notice This equipment has been tested and found to comply SANYO POA-PN01 with the limits for a Class B digital device, pursuant to Tested To Comply part 15 of the FCC Rules. [. . . ] Type the comment in the text area and then press the Save button. These parameters will appear only when the analog computer input mode is selected. PJ-Net Organizer OWNER'S MANUAL 37 ENGLISH Controlling the Projector SYSTEM Adjustment This function is to select the color system of video signal or scanning system of component signal input to the projector. Select a system with the radio buttons to match the color system or scanning system of input source, and then press the Set button. The available systems and operation are listed below. Adjustment items Color system (VIDEO/S-VIDEO Input) Operation AUTO: Automatically detect the color system of input signal. PAL, SECAM, NTSC, NTSC4. 43, PAL-M, PAL-N: Manually select the color system of input signal. 1080i, 1035i, 720p, 575p, 480p, 575i, 480i: Manually select the scanning system of input signal. Scanning system ((Y, Cb/Pb, Cr/Pr Input) Available selection when the VIDEO/S-VIDEO input Available selection when the Y, Cb/Pb, Cr/Pr input These selections will not appear when the source mode is selected to the computer mode. 38 Control the projector Image Adjustment This function is to adjust the projected picture image and set the image mode. For selection of image mode, select desired image mode among the "Standard", "Real", "Cinema", "Image1", "Image2", Image3" and "Image4" with the "Image Adjustment Mode" popup button and then press the Current set Set button. The setting items are value switched automatically according to selected input mode, computer or video input. To adjust the controls, press the + or - buttons to increase or decrease the value, or enter the value directly onto the text area of the control and then press Set button. The value next to each control represent the current control value and status. The mode "Image1" to "Image4" can be stored as your preferred image mode through "Save Adjustment" item located on lower part of the page. Select an image number from the popup menu button and then press the Save button. The "Original Mode" is to indicate which image mode are applied to the user preset modes "Image1" to "Image4". Adjustment items Operation Image adjustment mode Select image mode among the Standard, Real **, Cinema*, Image1 to Image4 with popup button menu . Adjustment items Contrast, Brightness, Sharpness*, Gamma, White Balance, Tint*, Color*, Noise Reduction*, Progressive* * Controls for video input, ** Controls for computer input Comment Type the comment in the text area and press the Save button. Range of control value is as follows: Sharpness: 0 to 31, Gamma: 0 to 15, others: 0 to 63 PJ-Net Organizer OWNER'S MANUAL 39 ENGLISH Controlling the Projector Screen Adjustment This function is to adjust the screen mode of the projector. The setting items are switched automatically according to selected input mode, computer or video input. The adjustment items and operation are listed below. Adjustment items Aspect True* Digital Zoom* Operation Select mode Normal or Wide with the radio button and then press the Set button. Expand or compress the projected image by pressing the Up or Down button repeatedly. * These items are only available in the computer input mode. Sound Adjustment This function is to adjust the sound of the projector. The value next to each control represents the current control value or status. Adjustment items Volume Operation Press the + or - button to increase or decrease the sound volume, or enter the value* directly onto the text area of the control and then press the Set button. The mute will be set OFF if the volume is changed. Current set value Mute The volume adjustment range is 0 to 63. 40 Control the projector Setting This function is to set up the projector. The setting items and operation are listed on the next page. Check if High speed control mode. PJ-Net Organizer OWNER'S MANUAL 41 ENGLISH Controlling the Projector The setting items and their operations are listed below. Operation Select the language used in the on-screen menu of the projector. Select your desired language with the popup menu button, and then press the Set button. Keystone Correct the distortion of the projected image with the Left, Right, Up and Down buttons. [. . . ] Also, projectors registered for multi-control cannot have any controls changed if they are in standby mode. But timer and clock settings are always effective, even for projectors in standby mode. Q Why does it sometimes take a lot of time to complete the page display? A The display speed of the page depends on the network environment in which both the projector and computer are placed. It may take much time to complete the page display if network traffic is heavy. By changing the preference of your web browser to "not show pictures", you may have page display more quickly at the heavy network traffic. [. . . ]